User's Manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 5. SWITCH OPERATION
- Appendix A—RJ-45 Pin Assignment
- Appendix B Troubles shooting
- APPENDEX C : GLOSSARY
- EC Declaration of Conformity
User’s Manual of IGS-801M
4.2.11 Green Networking
This page is used to enable/disable green networking function. Enable Power Saving mode will reduce system power
consumption when the link is not present.
Figure 4-2-16 Green Ethernet screenshot
he page includes the following fields: T
Object Description
Power Saving
Enable mode will reduce chip power when the signal from the copper link partner
is not present.
4.2.12 Logout
Press this function; the web interface will go back to login screen. The screen in Figure 4-67 and Figure 4-2-17 appears.
Figure 4-2-17 Logout screen
36