User's Manual
Manuals
Brands
PLANET Technology Manuals
DIN-rail Managed Ethernet Switches
8-Port 10/100/1000Mbps Managed Industrial Ethernet Switch
11
12
13
14
15
16
17
18
19
20
Table Of Contents
1. Introduction
1.1 Package Contents
1.2 Product Description
1.3 Product Features
1.4 Product Specification
2. Installation
2.1 Hardware Description
2.1.1 Physical Dimension
2.1.2 Front / Rear Panel
2.1.3 Top View
2.1.4 Bottom View
2.1.5 LED Indicators
2.2 Install the Switch
2.2.1 Installation Steps
2.2.2 DIN-Rail mounting
2.2.3 Wall Mount Plate Mounting
2.2.4 Wiring the Power Inputs
2.2.5 Wiring the Fault Alarm Contact
3. SWITCH MANAGEMENT
3.1 Overview
3.2 Management Methods
3.2.1 Web Management
3.2.2 Login the Switch
3.2.3 PLANET Smart Discovery Utility
4. WEB CONFIGURATION
4.1 Main Menu
4.2 System
4.2.1 System Info
4.2.2 IP Configuration
4.2.3 User Authentication
4.2.4 SNMP
4.2.4.1 SNMP Overview
4.2.4.2 SNMP Configuration
4.2.5 Firmware Upgrade
4.2.6 Configuration Upload
4.2.7 Factory Reset
4.2.8 System Reboot
4.2.9 Ping
4.2.10 Fault Relay Alarm
4.2.11 Green Networking
4.2.12 Logout
4.3 Port Management
4.3.1 Port Configuration
4.3.2 Port Statistics
4.3.3 Port Mirroring
4.3.4 Cable Diagnostics
4.4 Link Aggregation
4.4.1 Port Trunk
4.4.2 LACP
4.4.3 LACP Status
4.5 VLANs
4.5.1 VLAN Membership
4.5.1.1 Add a VLAN Group
4.5.1.2 Modify the VLAN Group Member
4.5.2 Per Port Configuration
4.5.3 VLAN setting example:
4.5.3.1 Two separate 802.1Q VLAN
4.5.3.2 Two VLANs with overlap area
4.5.3.3 VLAN Trunking between two 802.1Q aware switch
4.6 Rapid Spanning Tree
4.6.1 Theory
4.6.2 RSTP System Configuration
4.6.3 RSTP Port Configuration
4.6.4 RSTP Status
4.7 Multicast
4.7.1 IGMP Snooping Configuration
4.7.2 IGMP Snooping Status
4.7.3 Multicast Group Table
4.8 Quality of Service
4.8.1 Understand QOS
4.8.2 QoS Configuration
4.8.3 802.1p QoS Mode
4.8.4 DSCP QoS Mode
4.9 802.1X Network Access Control
4.9.1 Understanding IEEE 802.1X Port-Based Authentication
4.9.2 RADIUS Server Configuration
4.9.3 802.1X Authentication Port Configuration
4.10 MAC Addresses
4.10.1 Dynamic Address Table
4.10.2 Static MAC Address
5. SWITCH OPERATION
5.1 Address Table
5.2 Learning
5.3 Forwarding & Filtering
5.4 Store-and-Forward
5.5 Auto-Negotiation
Appendix A—RJ-45 Pin Assignment
A.1 Switch's RJ-45 Pin Assignments
A.2 10/100Mbps, 10/100Base-TX
Appendix B Troubles shooting
APPENDEX C : GLOSSARY
EC Declaration of Conformity
User’s Manual of IGS-801M
Step 3:
Check the DIN-Rail is tightly on the track.
Please refer to following procedures to remov
e the
Industrial Gigabit Ethernet Switch
from the track.
Step 4:
Lightly press the button of DIN-Rail
for remove it from the track.
17
1
...
...
15
16
17
18
19
...
...
120
