User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 IGMP Snooping
- 4.9 MLD Snooping
- 4.10 LLDP
- 4.11 MAC Address Table
- 4.12 Quality of Service
- 4.13 Security
- 4.14 Ring
- 4.15 Maintenance
- 4.16 Diagnostics
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-801M
42
The page includes the following fields:
Object Description
• System Name
Display the current system name
• System Location
Display the current system location
• System Contact
Display the current system contact
• MAC Address
The MAC address of this Industrial Managed Switch.
• IP Address
The IP address of this Industrial Managed Switch.
• Subnet Mask
The subnet mask of this Industrial Managed Switch.
• Gateway
The gateway of this Industrial Managed Switch.
• Loader Version
The loader version of this Industrial Managed Switch.
• Loader Date
The loader date of this Industrial Managed Switch.
• Firmware Version
The firmware version of this Industrial Managed Switch.
• Firmware Date
The firmware date of this Industrial Managed Switch.
• System Object ID
The system object ID of the Industrial Managed Switch.
• System Up Time
The period of time the device has been operational.
• PCB/HW Version
The hardware version of this Industrial Managed Switch.
• Power Status
The Current Status of power input for PWR1 and PWR2.
Buttons
: Click to edit parameter.