User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 IGMP Snooping
- 4.9 MLD Snooping
- 4.10 LLDP
- 4.11 MAC Address Table
- 4.12 Quality of Service
- 4.13 Security
- 4.14 Ring
- 4.15 Maintenance
- 4.16 Diagnostics
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-801M
309
Buttons
: Click to add ACE list
Figure 4-13-77: IPv6-based ACE Table Page Screenshot
The page includes the following fields:
Object Description
• ACL Name
Displays the current ACL name.
• Sequence
Displays the current sequence.
• Action
Displays the current action.
• Protocol
Displays the current protocol.
• Source IP Address
Displays the current source IP address.
• Source IP Address
Wildcard Mask
Displays the current source IP address wildcard mask.
• Destination IP Address
Displays the current destination IP address.
• Destination IP Address
Wildcard Mask
Displays the current destination IP address wildcard mask.
• Source Port Range
Displays the current source port range.
• Destination Port
Range
Displays the current destination port range.
• Flag Set
Displays the current flag set.
• DSCP
Displays the current DSCP.
• IP Precedence
Displays the current IP precedence.
• ICMP Type
Displays the current ICMP Type.
• ICMP Code
Displays the current ICMP code.
• Modify
Click to edit IPv6-based ACL parameter.
Click to delete IPv6-based ACL entry.