User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 IGMP Snooping
- 4.9 MLD Snooping
- 4.10 LLDP
- 4.11 MAC Address Table
- 4.12 Quality of Service
- 4.13 Security
- 4.14 Ring
- 4.15 Maintenance
- 4.16 Diagnostics
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-801M
288
4.13.8.2 Binding Table
The IP Source Guard Static Binding Entry and Table Status screens in Figure 4-13-60 and Figure 4-13-61 appear.
Figure 4-13-60: IP Source Guard Static Binding Entry Page Screenshot
The page includes the following fields:
Object Description
• Port
Select port from this drop-down list.
• VLAN ID
Indicates the ID of this particular VLAN.
• MAC Address
Sourcing MAC address is allowed.
• IP Address
Sourcing IP address is allowed.
Buttons
: Click to add authentication list
Figure 4-13-61: IP Source Guard Binding Table Status Page Screenshot
The page includes the following fields:
Object Description
• Port
Displays the current port.
• VLAN ID
Displays the current VLAN.
• MAC Address
Displays the current MAC address.
• IP Address
Displays the current IP Address.
• Type
Displays the current entry type.
• Lease Time
Displays the current lease time.
• Action
Click to delete IP source guard binding table status entry.