User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 IGMP Snooping
- 4.9 MLD Snooping
- 4.10 LLDP
- 4.11 MAC Address Table
- 4.12 Quality of Service
- 4.13 Security
- 4.14 Ring
- 4.15 Maintenance
- 4.16 Diagnostics
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-801M
278
4.13.6.10 Option82 Circuit-ID Setting
Set creation method for option82, users can define the parameters of circuit-id suboption by themselves. Option82 Circuit-ID
Setting screens in Figure 4-13-47 and Figure 4-13-48 appear.
Figure 4-13-47: Option82 Port Circuit-ID Setting Page Screenshot
The page includes the following fields:
Object Description
• Port
Select port from this drop-down list.
• VLAN
Indicates the ID of this particular VLAN.
• Circuit ID
Set the option1 (Circuit ID) content of option 82 added by DHCP request packets.
Buttons
: Click to apply changes.
Figure 4-13-48: Option82 Port Setting Page Screenshot
The page includes the following fields:
Object Description
• Port
Displays the current port.
• VLAN
Displays the current VLAN.
• Circuit ID
Displays the current circuit ID.