User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 IGMP Snooping
- 4.9 MLD Snooping
- 4.10 LLDP
- 4.11 MAC Address Table
- 4.12 Quality of Service
- 4.13 Security
- 4.14 Ring
- 4.15 Maintenance
- 4.16 Diagnostics
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-801M
215
The page includes the following fields:
Object Description
• Port
The switch port number of the logical port.
• CoS Value
Displays the current CoS value.
• Remark CoS
Displays the current remark CoS.
• Remark DSCP
Displays the current remark DSCP.
• Remark IP Precedence
Displays the current remark IP precedence.
4.12.2.3 Queue Settings
The Queue Table and Information screens in Figure 4-12-5 and Figure 4-12-6 appear.
Figure 4-12-5: Queue Table Page Screenshot
The page includes the following fields:
Object Description
• Queue
Displays the current queue ID.
• Strict Priority
Controls whether the scheduler mode is "Strict Priority" on this switch port.
• WRR
Controls whether the scheduler mode is "Weighted" on this switch port.
• Weight
Controls the weight for this queue. This value is restricted to 1-100. This
parameter is only shown if "Scheduler Mode" is set to "Weighted".
• % of WRR Bandwidth
Displays the current bandwidth for each queue.
Buttons
: Click to apply changes.