User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 IGMP Snooping
- 4.9 MLD Snooping
- 4.10 LLDP
- 4.11 MAC Address Table
- 4.12 Quality of Service
- 4.13 Security
- 4.14 Ring
- 4.15 Maintenance
- 4.16 Diagnostics
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-801M
205
The page includes the following fields:
Object Description
• Port
The switch port number of the logical port.
• Coordinate
Displays the current coordinate.
• Civic Address
Displays the current civic address.
• ESC ELIN
Displays the current ESC ELIN.
4.10.8 LLDP Statistics
Use the LLDP Device Statistics screen to general statistics for LLDP-capable devices attached to the switch, and for LLDP
protocol messages transmitted or received on all local interfaces. The LLDP Global and Port Statistics screens in Figure
4-10-16 and Figure 4-10-17 appear.
Figure 4-10-16: LLDP Global Statistics Page Screenshot
The page includes the following fields:
Object Description
• Insertions
Shows the number of new entries added since switch reboot.
• Deletions
Shows the number of new entries deleted since switch reboot.
• Drops
Shows the number of LLDP frames dropped due to that the entry table was full.
• Age Outs
Shows the number of entries deleted due to Time-To-Live expiring.
Buttons
: Click to clear the statistics
: Click to refresh the statistics