User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 IGMP Snooping
- 4.9 MLD Snooping
- 4.10 LLDP
- 4.11 MAC Address Table
- 4.12 Quality of Service
- 4.13 Security
- 4.14 Ring
- 4.15 Maintenance
- 4.16 Diagnostics
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-801M
202
Buttons
: Click to apply changes.
Figure 4-10-11: LLDP MED Network Policy Table Page Screenshot
The page includes the following fields:
Object Description
• Network Policy
Number
Displays the current network policy number.
• Application
Displays the current application.
• VLAN ID
Displays the current VLAN ID.
• VLAN Tag
Displays the current VLAN tag status.
• L2 Priority
Displays the current L2 priority.
• DSCP Value
Displays the current DSCP value.
Buttons
: Click to delete LLDP MED network policy table entry.
4.10.7 MED Port Setting
The Port LLDP MED Configuration/Port Setting Table screens in Figure 4-10-12 and Figure 4-10-13 appear.
Figure 4-10-12: Port LLDP MED Configuration Page Screenshot
The page includes the following fields:
Object Description
• Port Select
Select port from this drop-down list.