User's Manual

Table Of Contents
Users Manual of IGS-801M
14
1.3 Product Specifications
Product IGS-801M
Hardware Specifications
Hardware Version
2
Copper Ports 8 x 10/100/1000BASET RJ45 auto-MDI/MDI-X port
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm
One relay output for power failure. Alarm relay current carry ability: 1A @ DC
24V
Dimensions (W x D x H)
135 x 87 x 32 mm, 1U height
Weight
472g
Power Requirements
DC 12 to 48V
AC 24V
Power Consumption/
Dissipation
4.5 watts/15BTU (System on)
10 watts/34BTU (Full loading)
ESD Protection
6KV DC
Enclosure
IP30 metal case
Installation
DIN-rail kit and wall-mount kit
LED
System:
Power 1, Power 2, Fault Alarm
Ports:
10/100 Link/Act
1000 Link/Act
Switching
Switch Architecture
Store-and-Forward
Switch Fabric
16Gbps/non-blocking
Switch Throughput@64Bytes
11.9Mpps
Address Table
8K entries
Shared Data Buffer
4.1 megabits
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 10K bytes
Layer 2 Functions
Port Mirroring
TX/RX/both
Many-to-1 monitor
VLAN
802.1Q tagged VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling