User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN Setting Example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 IGMP Snooping
- 4.9 MLD Snooping
- 4.10 LLDP
- 4.11 MAC Address Table
- 4.12 Quality of Service
- 4.13 Security
- 4.14 Ring
- 4.15 Maintenance
- 4.16 Diagnostics
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of IGS-801M
10
1. INTRODUCTION
1.1 Packet Contents
Thank you for purchasing PLANET Industrial Layer 2/4 Managed Ethernet Switch, IGS-801M. “Industrial Managed Switch”
mentioned in this user’s manual refers to the IGS-801M.
IGS-801M
Industrial 8-Port 10/100/1000T Managed Ethernet Switch
Open the box of the Industrial Managed Switch and carefully unpack it. The box should contain the following items:
Industrial Gigabit
Ethernet Switch x 1
Quick Installation
Guide x 1
Wall-mount Kit x 1
DIN-rail Kit x 1 RJ45 Dust Caps x 8
If any item is found missing or damaged, please contact your local reseller for replacement.