User's Manual

Table Of Contents
User’s Manual of IGS-801M
1.5 Product Specifications
Product IGS-801M
Hardware Specifications
Hardware Version 2
Copper Ports 8 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port
Switch Architecture Store-and-Forward
Switch Fabric 16Gbps/non-blocking
Switch Throughput@64Bytes 11.9Mpps
Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
10K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
ESD Protection 6KV DC
EFT Protection 6KV DC
Enclosure IP30 metal case
Installation DIN rail kit and wall mount kit
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm
One relay output for power or port failure.
Alarm relay current carry ability: 1A @ DC 24V
LED
System:
Power 1, Power 2, Fault Alarm
Ports:
10/100 Link/Act
1000 Link/Act
Dimensions (W x D x H) 135 x 87 x 32 mm, 1U height
Weight 472g
Power Requirements
DC 12 to 48V
AC 24V
Power Consumption/
Dissipation
4.5 watts/15BTU (System on)
10 watts/34BTU (Full loading)
Layer 2 Functions
Port Mirroring
TX/RX/both
Many-to-1 monitor
VLAN
802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling
16