Datasheet

3
IGS-6329-8UP2S2X/IGS-6329-8UP2S4X
• Compatible with Cisco uni-directional link detection(UDLD) that
monitors a link between two switches and blocks the ports on
both ends of the link if the link fails at any point between the
two devices
• Supports G.8032 ERPS (Ethernet Ring Protection Switching)
• IEEE 1588v2 PTP (Precision Time Protocol) transparent clock
mode
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafc classication
– IEEE 802.1p CoS
– IP TOS/DSCP/IP precedence
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policing on the switch port
• DSCP remarking
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port ltering
• IPv6 MLD snooping port ltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1X Port-based/MAC-based network access
authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
– Guest VLAN assigns clients to a restricted VLAN with
limited services
• Access Control Lit
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCP snooping to lter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoong attacks
Intelligent Alive Check for Powered Device
The IGS-6329 Series can be configured to monitor connected PD’s status in real
time via ping action. Once the PD stops working and responding, the IGS-6329-
Series will recycle the PoE port power and bring the PD back to work. It also
greatly enhances the reliability in that the PoE port will reset the PD power, thus
reducing administrator’s management burden.
PoE PD Alive Check
Restart PoE Device
Step 3
Checking alive status for 3 times
Step 2
No Response!
Ping Request
PoE Device Status Good!!
Step 1
Ping Request
Ping Echo
PoE Schedule for Energy Savings
Under the trend of energy savings worldwide and contributing to environmental
protection on the Earth, the IGS-6329 Series can effectively control the power
supply besides its capability of giving high watts power. The built-in “PoE
schedule” function helps you to enable or disable PoE power feeding for each
PoE port during specied time intervals and it is a powerful function to help SMBs
or enterprises save power and money.
Total Consumption of 36 watts/hr Save 24 watts/hr during off-business hours
Total Saved = 10800watts/month
6 Watts 6 Watts 12 Watts 12 Watts
PoE Schedule
08:00~17:00 17:00~08:00
6 Watts 6 Watts 12 Watts 12 Watts
OFF OFF OFF
ON ON ON ON ON
Scheduled Power Recycling
The IGS-6329 Series allows each of the connected PoE IP cameras or PoE
wireless access points to reboot at a specified time each week. Therefore, it will
reduce the chance of IP camera or AP crash resulting from buffer overow.
IP Camera
S M T W T F S
AP Router IP Phone
PoE lighting
Door Phone
Automatically Reboot
Layer 3 Routing Support
The IGS-6329 Series enables the administrator to conveniently boost network
efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, the
RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings
automatically. The RIP can employ the hop count as a routing metric and prevent
routing loops by implementing a limit on the number of hops allowed in a path