Quick Guide

7
4. Terminal Setup
Tocongure the system,connectaserialcable toaCOMporton aPCornotebook
computerandtoRJ45typeserial(console)portoftheIndustrialManagedSwitch.
PC/Workstation with
Terminal Emulation Software
RJ45 to DB9 RS232 Cable
Serial Port
Console Port
115200,N,8,1
IGS Industrial Managed Switch
Console
115200,N,8,1
A terminal program is required to make the software connected to the Industrial
Managed Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
z Baud: 115200
zParity:None
z Data bits: 8
z Stop bits: 1
zFlowcontrol:None