Quick Guide
4
2. Requirements
The Industrial Managed Switch provides local and remote login interface for
management purposes. The following equipment is necessary for further
management:
z Workstations running Windows 7/8/10/11, Windows 2012/2008, MAC OS X or
later,Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPProtocols.
z WorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard).
z Serial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
Terminal emulator - The above Workstations have been installed with
terminal emulator, such as Tera Term, PuTTY or Hyper Terminal included in
WindowsXP/2003.
Serial cable -- one end is attached to the RS232 serial port, while the other
end to the console port of the Industrial Managed Switch.
z Ethernet Port Connection
Network cables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web browser.
Note
It is recommended to use Internet Explorer 11.0 or above to
access the Industrial Managed Switch.
If the Web interface of the Industrial Managed PoE+ Switch is not
accessible, please turn off the anti-virus software or firewall and
then try it again.