Quick Guide

15
6.RecoveringBacktoDefaultConguration
 IP address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address “192.168.0.100” and the
user password to factory default mode (default password is admin), press the
hardware-based reset button on the front panel for about 5~10 seconds. After
the device is rebooted, you can log in the management Web interface within the
same subnet of 192.168.0.xx and default password. Be noted that all the previous
setups will be disappeared after the factory default reset is made.
Console
115200,N,8,1
1
3
5
7
2
4
6
8
1
2
3
Reset
P1 P2 Alarm
I/O
Ring
R.O.
10/100
1G
LNK/ACT
LNK/ACT
Reset Button
Figure 6-1: IGS-6329-8UP2S2X/IGS-6329-8UP2S4X Reset Button