Datasheet

IGS-6329-8UP2S2X
9
Specications
Product
IGS-6329-8UP2S2X
Hardware Specications
Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP Ports
2 1000BASE-SX/LX/BX SFP slot interfaces (Port-9 and Port-10)
Compatible with 100BASE-FX and 2500BASE-X SFP
SFP+ Ports
2 10GBASE-SR/LR SFP+ slot interfaces (Port-11 to Port-12)
Compatible with 1000BASE-X and 2500BASE-X SFP
PoE Injector Ports 8 ports with 802.3bt PoE++ injector function with Port-1 to Port-8
Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
Digital Input (DI)
2 digital inputs:
Level 0: -24~2.1V (±0.1V)
Level 1: 2.1~24V (±0.1V)
Input load to 24V DC, 10mA max.
Digital Output (DO)
2 digital outputs:
Open collector to 24VDC, 100mA
Enclosure IP30 aluminum case
Installation DIN-rail or wall mounting
Dimensions (W x D x H) 76 x 135 x 152 mm
Weight 1,152g
Power Requirements
Dual DC 48~54V, 8A max.
(>52V DC for 802.3bt PoE++ output recommended)
Power Consumption
Max. 29 watts/98.96BTU@54V DC input (System on)
Max. 401 watts/1,368.27BTU@54V DC input (Full loading with 802.3bt PoE++ function)
ESD Protection
Air 8KV DC
Contact 6KV DC
Surge Protection 4KV DC
LED Indicator
System:
Power 1 (Green), Power 2 (Green), Alarm (Red)
Ring (Green), Ring Owner (Green), DIDO (Red)
Per 10/100/1000T RJ45 PoE++ Port:
1000Mbps LNK/ACT (Green)
10/100Mbps LNK/ACT (Amber)
802.3bt PoE++-in-use x 1 (Green)
802.3at/af PoE-in-use x 1 (Amber)
Per SFP Interface:
1G/2.5G LNK/ACT (Green)
100 LNK/ACT (Amber)
Per SFP+ Port:
10Gbps LNK/ACT (Green)
1Gbps LNK/ACT (Amber)
PoE Usage:
90W, 180W, 270W, 360W (Amber)
Switching Specications
Switch Architecture Store-and-Forward
Switch Fabric 60Gbps/non-blocking
Throughput (packet per second) 44.64Mpps@ 64 bytes packet
Address Table 32K entries, automatic source address learning and aging
Shared Data Buffer 32Mbits
Jumbo Frame 10Kbytes
SDRAM 512Mbytes
Flash Memory 64Mbytes
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Switching Specications
PoE Standard
IEEE 802.3bt PoE++ Type-4 PSE
Backward compatible with 802.3at PoE+ PSE