Datasheet

3
IGS-6325-8UP2S2X
IGS-6325-8UP2S
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
– IEEE 802.1p CoS
– IP TOS/DSCP/IP precedence
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policingontheswitchport
• DSCP remarking
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4IGMPsnoopingportltering
• IPv6MLDsnoopingportltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1X Port-based/MAC-based network access
authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
– Guest VLAN assigns clients to a restricted VLAN with
limited services.
• Access Control Lit
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCPsnoopingtolterdistrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console and Telnet Command Line Interface
– HTTP web switch management
– SNMP v1 and v2c switch management
– SSH, TLS, SSL and SNMP v3 secure access
Intelligent Alive Check for Powered Device
TheIGS-6325PoE++SeriescanbeconguredtomonitorconnectedPD’sstatusin
real time via ping action. Once the PD stops working and responding, the IGS-6325
PoE++ Series will recycle the PoE port power and bring the PD back to work. It also
greatly enhances the reliability in that the PoE port will reset the PD power, thus
reducing administrator’s management burden.
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental
protection on the Earth, the IGS-6325 PoE++ Series can effectively control the power
supply besides its capability of giving high watts power. The built-in “PoE schedule”
function helps you to enable or disable PoE power feeding for each PoE port during
speciedtimeintervalsanditisapowerfulfunctiontohelpSMBsorenterprisessave
power and money.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification