Datasheet

2
IGS-6325-8UP2S2X
IGS-6325-8UP2S
a distance of up to 160 meters
• Intelligent PoE features
– Temperature threshold control
– PoE usage threshold control
– PD alive check
– PoE schedule
Layer 3 IP Routing Features
• IP dynamic routing protocol supports OSPFv2
• IPv4/IPv6 hardware static routing
• Routing interface provides per VLAN routing mode
Layer 2 Features
• High performance of Store-and-Forward architecture, and
runt/CRClteringeliminateserroneouspacketstooptimize
the network bandwidth
• Storm Control support
– Broadcast/Multicast/Unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Up to 255 VLANs groups, out of 4095 VLAN IDs
– Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Protocol-based VLAN
– MAC-based VLAN
– Voice VLAN
– GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
– BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 4 trunk groups with 4 ports per trunk group
– Up to 40Gbps bandwidth (duplex mode)
• Provides port mirror (many-to-1)
• Portmirroringtomonitortheincomingoroutgoingtrafcon
a particular port
• Loop protection to avoid broadcast loops
• Link Layer Discovery Protocol (LLDP)
• Compatible with Cisco uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any point
between the two devices
• Supports G.8032 ERPS (Ethernet Ring Protection
Switching)
• IEEE 1588 and Synchronous Ethernet network timing
Being able to operate under wide temperature range from -40 to 75 degrees C, the
IGS-6325 PoE++ Switch series can be placed in almost any difficult environment.
The IGS-6325 PoE++ Switch series also allows either DIN rail or wall mounting for
efcientuseofcabinetspace.
802.3bt PoE++ – 90~95-watt Power over 4-pair UTP Solution
As the IGS-6325 PoE++ Series adopts the IEEE 802.bt PoE++ standard and PoH
technology, it is capable to source up to 95 watts of power by using all the four pairs
of standard Cat5e/6 Ethernet cabling to deliver power and full-speed data to each
remote PoE compliant powered device (PD). It possesses triple amount of power
capability than the conventional 802.3at PoE+ and is an ideal solution to satisfy the
growing demand for higher power consuming network PDs, such as:
■PoEPTZspeeddomecameras
■Networkdevices
■Thinclients
■AIO(all-in-one)touchPCs,pointofsale(POS)andinformationkiosks
■Remotedigitalsignagedisplays
■PoElightings
802.3bt PoE++ and Advanced PoE Power Output Mode Management
To meet the demand of various powered devices consuming stable PoE power, the
IGS-6325 PoE++ Switch series provides five different PoE power output modes for
selection.
■90W802.3btPoE++PowerOutputMode
■95WUPOE/PoHPowerOutputMode
■60WForcePowerOutputMode
■30WEnd-spanPoEPowerOutputMode
■30WMid-spanPoEPowerOutputMode
Convenient and Smart ONVIF Devices with Detection Feature
PLANET has newly developed an awesome feature -- ONVIF Support -- which is
specicallydesignedforco-operatingwithvideoIPsurveillances.FromtheIGS-6325
PoE++ Switch series GUI, clients just need one click to search and show all of the
ONVIF devices via network application.
Inaddition,clientscanuploadoorplanstotheswitch,allowingtolocatesurveillance
devices for easier inspection and planning. Moreover, clients can get real-time
surveillance’s information and online/offline status, and also allows cameras PoE
reboot control from GUI.
60W 90W
802.3bt
Type 3
802.3bt
Type 4
802.3at
30W
Speed Dome
Thin Client
90-95W
PoE Lighting
IGS-6325-8UP2S2X