Quick Guide

6
IGS-6325-8UP2S/IGS-6325-8UP2S2X:DC48~56V
PWR1
PWR2
Fault
DI1 DO0 DO1DI0 GNDGND
DC Input:
48-56V , 7.5A max.
Max. fault loading: 24V, 1A
Dual power input is required
for maximum PoE loading.
Refer to user’s manual for
more details.
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-3: IGS-6325-8UP2S/IGS-6325-8UP2S2X Upper Panel
2.Tightenthewire-clampscrewsforpreventingthewiresfromloosening.
1 2 3 4 5 6
V+ V- V+ V-
Power 1 Power 2
Figure 3-4: The pin of 6-contact terminal block connector
Note
1. The wire gauge for the terminal block should be in the range
from 12 to 24 AWG.
2.Please check the wire AWG Ampere specification before
connectingPLANETIndustrialManagedSwitch.