Quick Guide

11
The previous command would apply the following settings for the Industrial
Managed Switch.
IPAddress:192.168.1.100
Subnet Mask: 255.255.255.0
Figure 4-3: Conguring IP Address Screen
4. Repeat step 1 to check if the IP address has changed.
4.3 Storingcurrentswitchconguration
1.Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
#copyrunning-congstartup-cong
Figure 4-4: Saving Current Conguration Command Screen
If the IP is successfully congured, the Industrial Managed Switch will apply the
new IP address setting immediately. You can access the Web interface of the
Industrial Managed Switch through the new IP address.
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.