Datasheet
IGS-6325 non-PoE Series
1
Industrial Layer 3 DIN-rail Managed Ethernet Switch
Multi 1/2.5/10G for Factory and Metropolitan Long-reach Networking
PLANET IGS-6325 Series are the smallest yet high-capacity, industrial-grade Layer
3 managed switches with high-density hybrid copper and fiber optic interfaces in
a DIN-rail type rugged case and can operate stably under the temperature range
from -40 to 75 degrees C.
Physical Port
• 8/16 10/100/1000BASE-T RJ45 copper ports
• 4/8 100/1000/2500BASE-X SFP slots for SFP type auto
detection
• 4 10GBASE-SR/LR SFP+ slots, compatible with
1000BASE-SX/LX/BX and 2500BASE-X SFP (IGS-6325-
8T4X and IGS-6325-8T8S4X)
• One RJ45-to-RS232 console interface for basic
management and setup
Industrial Hardened Design
• Dual power input, redundant power with reverse polarity
protection
– DC 9/12 to 48V input or AC 24V input
– Active-active redundant power failure protection
– Backup of catastrophic power failure on one supply
– Fault tolerance and resilience
• DIN-rail and wall-mountable designs
• IP30 aluminum case
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Digital Input and Digital Output
• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrates sensors into auto alarm system
• Transfers alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
• IP dynamic routing protocol supports OSPFv2
• IPv4/IPv6 hardware static routing
• Routing interface provides per VLAN routing mode
Layer 2 Features
• High performance of Store-and-Forward architecture, and
runt/CRClteringeliminateserroneouspacketstooptimize
the network bandwidth
• Storm control support
– Broadcast/Multicast/Unknown unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Up to 4K VLANs groups, out of 4095 VLAN IDs
– Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)
Models
10/100/1000T
Copper
100/1000/2500X
SFP
1G/10G
SFP+
Switch
Capacity
Power
Input
IGS-6325-8T8S4X
8
8
4 136Gbps
DC 12~48V
AC 24V
IGS-6325-8T8S -- 56Gbps
IGS-6325-8T4X -- 4 96Gbps
DC 9~48V
AC 24V
IGS-6325-16T4S 16 4 -- 52Gbps
They’re designed to be installed in any space-limited cabinets as they are small in
size.Theirconnectiondistancescanbeexiblyextendedviatheirpowerfulports.
Layer 3 Routing Support
The IGS-6325 Series enables the administrator to conveniently boost network
efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the
IPv4 OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an
interior dynamic routing protocol for autonomous system based on link state. The
protocolcreatesadatabaseforlinkstatebyexchanginglinkstatesamongLayer3
switches, and then uses the Shortest Path First algorithm to generate a route table
based on that database.