Datasheet

8
IGS-6325-8T8S4X / IGS-6325-8T8S
IGS-6325-8T4X
Specications
Product
IGS-6325-8T8S IGS-6325-8T8S4X IGS-6325-8T4X
Hardware Specications
Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP Ports
8 100/1000BASE-X SFP slot interfaces (Port-9 and Port-16)
Compatible with 100BASE-FX SFP transceiver
--
SFP+ Ports --
4 10GbBASE-SR/LR SFP+ slot interfaces
Compatible with 1000BASE-SX/LX/BX SFP transceiver
Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 32Gbps/non-blocking 112Gbps/non-blocking 96Gbps/non-blocking
Throughput 23.81Mpps@64Bytes 83.33Mpps@64Bytes 71.43Mpps@64Bytes
Address Table 16K entries, automatic source address learning and aging
Shared Data Buffer 32Mbits
Jumbo Frame 10K bytes
SDRAM 512Mbytes
Flash Memory 64Mbytes
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
Digital Input (DI)
2 digital input:
Level 0: -24~2.1V (±0.1V)
Level 1: 2.1~24V (±0.1V)
Input load to 24V DC, 10mA max.
Digital Output (DO)
2 digital output:
Open collector to 24VDC, 100mA
Enclosure IP30 aluminum case
Installation DIN-rail or wall mounting
Dimensions (W x D x H) 76 x 107 x 152 mm
Weight 1,065g 1,250g 1,020g
Power Requirements
DC 12~48V, 4A max.
AC 24V, 1.5A max.
Power Consumption
DC input:
Max. 9.12 watts/32BTU (system on)
Max. 26.04 watts/89 BTU (Full loading)
DC input:
Max. 12 watts/41BTU (system on)
Max. 38.4 watts/132 BTU (Full loading)
DC input:
Max. 10 watts/35BTU (system on)
Max. 29 watts/99 BTU (Full loading)
AC 24V input:
Max. 12 watts/41BTU (system on)
Max. 29 watts/99 BTU (Full loading)
AC 24V input:
Max. 13 watts/45BTU (system on)
Max. 38 watts/130 BTU (Full loading)
AC 24V input:
Max. 12 watts/41BTU (system on)
Max. 30 watts/103 BTU (Full loading)
ESD Protection 6KV DC
Surge Protection 4KV DC
LED Indicators
System:
Power 1 (Green), Power 2 (Green)
Fault Alarm (Red)
Ring (Green), Ring Owner (Green)
DIDO (Red)
Per 10/100/1000T RJ45 Port:
1000Mbps LNK/ACT (Green)
10/100Mbps LNK/ACT (Amber)
Per SFP Port:
1000Mbps LNK/ACT (Green)
100Mbps LNK/ACT (Amber)
Per SFP+ Port:
10Gbps LNK/ACT (Green)
1Gbps LNK/ACT (Amber)