Datasheet

2
IGS-6325-8T8S4X / IGS-6325-8T8S
IGS-6325-8T4X
• Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
– BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 14 trunk groups, with 16 ports for each trunk
– Up to 80Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing trafc on
a particular port
• Loop protection to avoid broadcast loops
• Link Layer Discovery Protocol (LLDP)
• Compatible with Cisco uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any point
between the two devices
• Supports G.8032 ERPS (Ethernet Ring Protection
Switching)
• IEEE 1588 and Synchronous Ethernet network timing
Quality of Service
• Ingress shaper and egress rate limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafc classication
– IEEE 802.1p CoS
– ToS/DSCP/IP Precedence of IPv4/IPv6 packets
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Trafc-policing on the switch port
• DSCP remarking
• Voice VLAN
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port ltering
• IPv6 MLD snooping port ltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x port-based/MAC-based network access
authentication
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-6325 Series supports redundant ring technology and features strong, rapid
self-recovery capability to prevent interruptions and external intrusions. It incorporates
advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology,
Spanning Tree Protocol (802.1s MSTP), and redundant power input system into
customer’s industrial automation network to enhance system reliability and uptime in
harsh factory environments. In a simple Ring network, the recovery time of data link
can be as fast as 10ms.
1000
1000
1000
1000
IGS-6325-8T8S4X
Core Switch
MAN Switch
Traffic
Controller
Factory
Highway
Office
Control Center
ERPS Ring for Metropolitan Area Network Application
Recovery Time < 10ms
IGS-6325-8T8S
Network with Cybersecurity Helps Minimize Security Risks
The IGS-6325 Series comes with enhanced cybersecurity to fend off cyberthreats
and cyberattacks. It supports SSHv2, TLS v1.2 and SSL protocols to provide strong
protection against advanced threats. Served as a key point to transmit data over
multiple long distance fiber optical connections to customer's critical equipment in
a business network, the cybersecurity feature of the IGS-6325 Series protects the
switch management and enhances the security of the mission-critical network without
any extra deployment cost and effort.
01010101010110010101010100010101010
01010101010110010101010100010101010
01010101010110010101010100010101010
Computer
SNMP v 3
SSH
SSL
TLS
Modbus TCP Provides Flexible Network Connectivity for Factory Automation
With the supported Modbus TCP/IP protocol, the IGS-6325 Series can easily
integrate with SCADA systems, HMI systems and other data acquisition systems in
factory floors. It enables administrators to remotely monitor the industrial Ethernet
switch’s operating information, port information, communication status, and DI
and DO status, thus easily achieving enhanced monitoring and maintenance of the
entire factory.
1588 Time Protocol for Industrial Computing Networks
The IGS-6325 Series is ideal for telecom and carrier Ethernet applications,
supporting MEF service delivery and timing over packet solutions for IEEE 1588 and
synchronous Ethernet.