Quick Guide

10
4.1 Logging on to the Console
Once the terminal has been connected to the device, power on the Industrial
Managed Switch and the terminal will display “running testing procedures”.
Note
The following console screen is based on the IGS-6325-16P4S.
The display of the IGS-6325 series is thesame as that of theIGS-
6325-16P4S.
Then, the following message asks to log in user name and password. The factory
defaultuser nameandpassword areshownasfollows asthelogin screeninFigure
4-1appears
UserName:admin
Password: admin
Figure 4-1: Console Login Screen
The user can now enter commands to manage the Industrial Managed Switch. For
adetaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new
password after this first setup.
2. Only accept command in lowercase letter under console inter-
face.