Datasheet
IGS-6325-8T8S4X/IGS-6325-8T8S
IGS-6325-8T4X/IGS-6325-16T4S
1
Industrial Layer 3 DIN-rail Managed Ethernet Switch
Physical Port
• 8/16 10/100/1000BASE-T RJ45 copper ports
• 8/4 100/1000BASE-X SFP slots for SFP type auto
detection
• 4 10GBASE-SR/LR SFP+ slots, compatible with
1000BASE-X SFP(IGS-6325-8T4X and IGS-6325-8T8S4X)
• One RJ45-to-RS232 console interface for basic
management and setup
Industrial Hardened Design
• Dual power input, redundant power with reverse polarity
protection
– DC 9/12 to 48V input or AC 24V input
– Active-active redundant power failure protection
– Backup of catastrophic power failure on one supply
– Fault tolerance and resilience
• DIN-rail and wall-mountable designs
• IP30 aluminum case
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Digital Input and Digital Output
• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrates sensors into auto alarm system
• Transfers alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
• IP dynamic routing protocol supports OSPFv2
• IPv4/IPv6 hardware static routing
• Routing interface provides per VLAN routing mode
Layer 2 Features
• High performance of Store-and-Forward architecture, and
runt/CRClteringeliminateserroneouspacketstooptimize
the network bandwidth
• Storm control support
Multi 1/10G for Factory and Metropolitan Long-reach Networking
PLANET IGS-6325 Series are the smallest yet high-capacity, industrial-grade Layer
3 managed switches with high-density hybrid copper and fiber optic interfaces in
a DIN-rail type rugged case and can operate stably under the temperature range
from -40 to 75 degrees C.
They’re designed to be installed in any space-limited cabinets as they are small in
size.Theirconnectiondistancescanbeexiblyextendedviatheirpowerfulports.
Models
10/100/1000T
Copper
100/1000X
SFP
1G/10G
SFP+
Switch
Capacity
Poower
Input
IGS-6325-8T8S4X
8
8
4 112G bps
DC 12~48V
AC 24V
IGS-6325-8T8S -- 32Gbps
IGS-6325-8T4X -- 4 96Gbps
DC 9~48V
AC 24V
IGS - 6325-16T4S 16 4 -- 40Gbps
Layer 3 Routing Support
The IGS-6325 Series enables the administrator to conveniently boost network
efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the
IPv4 OSPFv2(OpenShortestPathFirst)settingsautomatically.TheOSPFisan
interiordynamicroutingprotocolforautonomoussystembasedonlinkstate.The
protocolcreatesadatabaseforlinkstatebyexchanginglinkstatesamongLayer3
switches, and then uses the Shortest Path First algorithm to generate a route table
basedonthatdatabase.