Datasheet

IGS-6325 Rack-mount PoE series
3
Intelligent Alive Check for Powered Device
The IGS-6325 PoE Series can be configured to monitor connected PD’s status in
real time via ping action. Once the PD stops working and responding, the IGS-
6325 PoE Series will recycle the PoE port power and bring the PD back to work.
It also greatly enhances the reliability in that the PoE port will reset the PD power,
thus reducing administrator’s management burden.
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental
protection on the Earth, the IGS-6325 PoE Series can effectively control the
power supply besides its capability of giving high watts power. The built-in “PoE
schedule” function helps you to enable or disable PoE power feeding for each PoE
port during specified time intervals and it is a powerful function to help SMBs or
enterprises save power and money.
Layer 3 IP Routing Features
• Supports maximum 128 static routes and route
summarization
• IPv4 dynamic routing protocol supports OSPFv2
• IPv4/IPv6 hardware static routing
• Routing interface provides per VLAN routing mode
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
–
IEEE 802.1p CoS
–
IP TOS/DSCP/IP precedence
–
IP TCP/UDP port number
–
Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Trafc-policingontheswitchport
• DSCP remarking
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4IGMPsnoopingandportltering
• IPv6MLDsnoopingandportltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
–
IEEE 802.1x port-based / MAC-based network access
authentication
–
Built-in RADIUS client to co-operate with the RADIUS
servers
–
TACACS+ login users access authentication
–
RADIUS / TACACS+ users access authentication
• Access Control List
–
IP-based Access Control List (ACL)
–
MAC-based Access Control List
• Source MAC / IP address binding
• DHCPSnoopingtolteruntrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
• IP address access management to prevent unauthorized
intruder
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification
PoE
1000BASE-TX UTP with PoE
6 Watts 6 Watts 12 Watts 12 Watts
Total Consumption of 36 watts/hr
PoE
PoE PoE
PoE
Power
On
Power
On
Power
On
Power
On
5 PM8 AM
5 PM 8 AM
6 Watts 6 Watts 12 Watts 12 Watts
Save 24 watts / hr during off-business hours
PoE PoE
Total Saved = 10800watts / month
PoE PoE
Power
On
Power
Off
Power
Off
Power
Off