Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial EthernetIndustrial L3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Ethernet Switch (-40~75 degrees C)

IGS-6325 Rack-mount PoE series

Advanced Layer 3 Manageable PoE Solution for Hardened Environment

PLANET has launched two new PoE+ managed switches, namely the IGS-6325-24P4X

Industrial L3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed

Ethernet Switch and the IGS-6325-24P4S Industrial L3 24-Port 10/100/1000T

802.3at PoE + 4-Port Shared 100/1000X SFP Managed Ethernet Switch.

In the following sections, the term “IGS-6325 PoE Series” means the IGS-6325-

24P4X and IGS-6325-24P4S.

The IGS-6325 PoE Series features 24 10/100/1000BASE-T 802.3at PoE+ ports

with each port powering up to 36 watts, and 4 shared SFP ports and 4 10G SFP+

ports in a 1U case. It provides user-friendly yet advanced IPv6/IPv4 management

interfaces, abundant L2/L4 switching functions, Layer 3 OSPFv2 dynamic

routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve

the rapid self-recovery capability and PLANET intelligent PoE functions for

controlling the PoE outdoor IP surveillance and wireless network applications. It is

able to operate reliably, stably and quietly in the temperature range from -40 to 75

degrees C.

Layer 3 Routing Support

The IGS-6325 PoE Series enables the administrator to conveniently boost network

efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the

IPv4 OSPFv2 ( Open Shortest Path First ) settings automatically. The OSPF is an

interior dynamic routing protocol for autonomous system based on link state. The

protocol creates a database for link state by exchanging link states among Layer 3

switches, and then uses the Shortest Path First algorithm to generate a route table

based on that database.degrees C.

Industrial L3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+/Shared

100/1000X SFP Managed Ethernet Switch (-40~75 degrees C)

Physical Port

• 24 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with

IEEE 802.3at PoE+ Injector function

• 4 100/1000BASE-X mini-GBIC/SFP slots, shared with

Port-21 to Port-24 compatible with 100BASE-FX SFP

• 4 10GBASE-SR/LR SFP+ slots, compatible with

1000BASE-SX/LX/BX SFP

• RJ45 to RS232 DB9 console interface for basic

management and setup

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus/end-

span PSE

• Up to 24 IEEE 802.3af devices powered

• Supports PoE power up to 36 watts for each PoE port

• 440-watt PoE budget

• Auto detects powered device (PD)

• Circuit protection prevents power interference between

ports

• Remote power feeding up to 100m

• PoE management features

–

Total PoE power budget control

–

Per port PoE function enable/disable

–

PoE admin-mode control

–

PoE port power feeding priority

–

Per PoE port power limit

–

PDclassicationdetection

• Intelligent PoE features

–

Temperature threshold control

–

PoE usage threshold control

–

PD alive check

–

PoE schedule

Industrial Protocol

• Modbus TCP for real-time monitoring in the SCADA system

• IEEE 1588v2 PTP (Precision Time Protocol)

Industrial Case and Installation

• IP30 metal case

• 19-inch rack-mountable design

• Dual 48~56V DC, redundant power with reverse polarity

protection

–

Active-active redundant power failure protection

–

Backup of catastrophic power failure on one supply

–

Fault tolerance and resilience

Summary of content (10 pages)

PAGE 1
IGS-6325 Rack-mount PoE series Industrial L3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+/Shared 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) Physical Port • 24 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.
PAGE 2
IGS-6325 Rack-mount PoE series Cybersecurity Network Solution to Minimize Security Risks The IGS-6325 PoE Series supports SSHv2, TLS and SSL protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, ARP Inspection Protection, 802.1x port-based and MAC-based network access control, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution.
PAGE 3
IGS-6325 Rack-mount PoE series Layer 3 IP Routing Features • Supports maximum 128 static routes and route summarization • IPv4 dynamic routing protocol supports OSPFv2 • IPv4/IPv6 hardware static routing • Routing interface provides per VLAN routing mode Quality of Service • Ingress Shaper and Egress Rate Limit per port bandwidth control • 8 priority queues on all switch ports • Traffic classification –– IEEE 802.
PAGE 4
IGS-6325 Rack-mount PoE series Scheduled Power Recycling The IGS-6325 PoE Series allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.
PAGE 5
IGS-6325 Rack-mount PoE series Robust Layer 2 Features The IGS-6325 PoE Series can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-6325 PoE Series provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255.
PAGE 6
IGS-6325 Rack-mount PoE series Intelligent SFP Diagnosis Mechanism The IGS-6325 PoE Series supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
PAGE 7
IGS-6325 Rack-mount PoE series Specifications Product IGS-6325-24P4X IGS-6325-24P4S Hardware Specifications Copper Ports 24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports SFP/mini-GBIC Slots 4 100/1000BASE-X SFP interfaces, shared with Port-21 to Port-24 Backward compatible with 100BASE-FX SFP transceiver SFP+ Slots 4 10GbBASE-SR/LR SFP+ interfaces (Port-25 to Port28) Backward compatible with 1000BASE-SX/LX/BX SFP transceiver Console 1 x RS232-to-RJ45 serial port (115200, 8, N, 1) Switch Architectu
PAGE 8
IGS-6325 Rack-mount PoE series PoE Power Budget 48V Power input - Single power input: 240W maximum (depending on power input) - Dual power input: 300W maximum (depending on power input) 52~56V Power input - Single power input: 240W maximum (depending on power input) - Dual power input: 440W maximum (depending on power input) * Dual power input must be the same as DC voltage, like dual 56V Max. Number of Class 2 PDs 24 Max. Number of Class 3 PDs 24 Max.
PAGE 9
IGS-6325 Rack-mount PoE series 48V Power input - Single power input: 240W maximum (depending on power input) - Dual power input: 300W maximum (depending on power input) 52~56V Power input - Single power input: 240W maximum (depending on power input) - Dual power input: 440W maximum (depending on power input) * Dual power input must be the same as DC voltage, like dual 56V PoE Power Budget Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE Standards Compliance IEEE 802.
PAGE 10
IGS-6325 Rack-mount PoE series IGS-6325-24P4S 301.50 443.70 481.70 468.70 4.00 DC 2 2 4 6 8 10 12 14 16 18 20 22 22 24 24 CAUTION + IGS-6325-24P4S Please refer to user’s manual before connect the DC wire. Console DIDO Fault R.O. DC2 OFF DI 0 DI 1 DO 0 DO 1 GND GND 1000 100 Ring DC1 1 3 5 7 9 11 13 15 17 19 21 23 21 22 23 24 7.00 Fault + LNK/ACT PoE-in-Use DC POWER ON 30.20 42.60 DC 1 , 11A 44.00 DC Input: 48-56V Reset 115200, N, 8, 1 19.