Quick Guide

13
5.2 SavingCongurationviaWeb
In the Industrial Managed Switch, the running conguration stores in the RAM. In
the current version, the running conguration sequence of running-cong can be
saved from the RAM to FLASH by executing save startup cong command, so that
therunning conguration sequencebecomes the startup congurationle, which is
calledcongurationsave.
To save all applied changes and set the current conguration as a startup
conguration, the startup-conguration le will be loaded automatically across a
system reboot.
1. Click Maintenance > Switch Maintenance > Save Startup Cong.
Figure 5-5: Maintenance
Figure 5-6: Save Startup Cong