User's Manual

Table Of Contents
Users Manual of IGS-6325 series
21
1.4 Product Features
Hardware Conformance
IGS-6325-20T4C4X and IGS-6325-20S4C4X
One 100 to 240V AC or dual 36 to 60V DC power input, redundant power with reverse polarity protection
Active-active redundant power failure protection
Backup of catastrophic power failure on one supply
Fault tolerance and resilience
IGS-6325-24P4X and IGS-6325-24P4S
Dual 48 to 56V DC power input, redundant power with reverse polarity protection
Active-active redundant power failure protection
Backup of catastrophic power failure on one supply
Fault tolerance and resilience
19-inch rack-mountable design
IP30 metal case protection
Supports EFT protection for 6000V DC power and 6000V DC Ethernet ESD protection
-40 to 75 degrees C operating temperature
Industrial Protocol
Modbus TCP for real-time monitoring in the SCADA system
Digital Input and Digital Output
2 Digital Input (DI)
2 Digital Output (DO)
Integrates sensors into auto alarm system
Transfers alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
Supports maximum 128 static routes and route summarization
IP dynamic routing protocol supports OSPFv2
Routing interface provides per VLAN routing mode
Layer 2 Features
High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
Storm control support
Broadcast/Multicast/Unknown unicast
Supports VLAN
IEEE 802.1Q tagged VLAN
Up to 256 VLANs groups, out of 4096 VLAN IDs