IGS-6325-Series User Manual

User’s Manual of IGS-6325 series
233
Port Configuration
Object
Description
 Port
The switch port number of the port.
 Enable
Controls whether loop protection is enabled on this switch port.
 Action
Configures the action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.
 Tx Mode
Controls whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.3.10.2 Loop Protection Status
This page displays the loop protection port status of the switch; screen in
Figure 4-3-10-2 appears.
Figure 4-3-10-2: Loop Protection Status Screenshot
The page includes the following fields:
Object
Description
 Port
The Industrial Managed Switch port number of the logical port.
 Action
The currently configured port action.
 Transmit
The currently configured port transmit mode.
 Loops
The number of loops detected on this port.
 Status
The current loop protection status of the port.
 Loop
Whether a loop is currently detected on the port.
 Time of Last Loop
The time of the last loop event detected.