IGS-6325-Series User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web page
- 4.2 System
- 4.2.1 Management
- 4.2.1.1 System Information
- 4.2.1.2 IP Configuration
- 4.2.1.3 IP Status
- 4.2.1.4 Users Configuration
- 4.2.1.5 Privilege Levels
- 4.2.1.6 NTP Configuration
- 4.2.1.6.1 System Time Correction Manually
- 4.2.1.7 Time Configuration
- 4.2.1.8 UPnP
- 4.2.1.9 DHCP Relay
- 4.2.1.10 DHCP Relay Statistics
- 4.2.1.11 CPU Load
- 4.2.1.12 System Log
- 4.2.1.13 Detailed Log
- 4.2.1.14 Remote Syslog
- 4.2.1.15 SMTP Configuration
- 4.2.1.16 Fault Alarm
- 4.2.1.17 Digital Input/Output
- 4.2.2 Simple Network Management Protocol
- 4.2.3 RMON
- 4.2.4 DHCP server
- 4.2.5 Industrial Protocol
- 4.2.1 Management
- 4.3 Switching
- 4.3.1 Port Management
- 4.3.2 Link Aggregation
- 4.3.3 VLAN
- 4.3.3.1 VLAN Overview
- 4.3.3.2 IEEE 802.1Q VLAN
- 4.3.3.3 VLAN Port Configuration
- 4.3.3.4 VLAN Membership Status
- 4.3.3.5 VLAN Port Status
- 4.3.3.6 Private VLAN
- 4.3.3.6 Port Isolation
- 4.3.3.7 VLAN setting example:
- 4.3.3.7.1 Two Separate 802.1Q VLANs
- 4.3.3.7.2 VLAN Trunking between two 802.1Q aware switches
- 4.3.3.7.3 Port Isolate
- 4.3.3.8 MAC-based VLAN
- 4.3.3.9 IP Subnet-based VLAN Membership Configuration
- 4.3.3.10 Protocol-based VLAN
- 4.3.3.11 Protocol-based VLAN Membership
- 4.3.4 Spanning Tree Protocol
- 4.3.5 Multicast
- 4.3.6 MLD Snooping
- 4.3.7 MVR (Multicast VLAN Registration)
- 4.3.8 LLDP
- 4.3.9 MAC Address Table
- 4.3.10 Loop Protection
- 4.3.11 UDLD
- 4.3.12 GVRP
- 4.3.13 PTP
- 4.4 Quality of Service
- 4.5 Security
- 4.6 Ring
- 4.7 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A: Networking Connection
- APPENDIX B : GLOSSARY
User’s Manual of IGS-6325 series
112
The page includes the following fields:
Object
Description
Rx and Tx Discover
Display the number of discover (option 53 with value 1) packets received and
transmitted.
Rx and Tx Offer
Display the number of offer (option 53 with value 2) packets received and
transmitted.
Rx and Tx Request
Display the number of request (option 53 with value 3) packets received and
transmitted
Rx and Tx Decline
Display the number of decline (option 53 with value 4) packets received and
transmitted.
Rx and Tx ACK
Display the number of ACK (option 53 with value 5) packets received and
transmitted.
Rx and Tx NAK
Display the number of NAK (option 53 with value 6) packets received and
transmitted.
Rx and Tx Release
Display the number of release (option 53 with value 7) packets received and
transmitted.
Rx and Tx Inform
Display the number of inform (option 53 with value 8) packets received and
transmitted
Rx and Tx Lease Query
Display the number of lease query (option 53 with value 10) packets received
and transmitted.
Rx and Tx Lease
Unassigned
Display the number of lease unassigned (option 53 with value 11) packets
received and transmitted.
Rx and Tx Lease
Unknown
Display the number of lease unknown (option 53 with value 12) packets received
and transmitted.
Rx and Tx Lease
Active
Display the number of lease active (option 53 with value 13) packets received
and transmitted
Rx Discarded
checksum error
Display the number of discard packet that IP/UDP checksum is error.
Rx Discarded from
Untrusted
Display the number of discarded packet that are coming from untrusted port.
Buttons
: Check this box to refresh the page automatically
Click to refresh the page immediately.
Clears the counters for the selected ports