Datasheet
IGS-6325-20T4C4X
1
PLANET IGS-6325-20T4C4X is an Industrial Layer 3 Managed Switch that features
24 10/100/1000Mbps ports, 4 shared SFP ports and 4 10G SFP+ ports, and supports
Layer 3 IP routing in a 1U case. With 10Gbps uplink, the IGS-6325-20T4C4X can
handle extremely large amounts of data in a secure topology linking to an industrial
backbone or high capacity servers. The IGS-6325-20T4C4X is capable of providing
non-blocking switch fabric and wire-speed throughput as high as 128Gbps in the
temperature range from -40 to 75 degrees C. It greatly simplies the tasks of upgrading
the industrial LAN for catering to increasing bandwidth demands. Furthermore, it adopts
user-friendly “Front Access” design for easy wiring and maintenance of the IGS-6325-
20T4C4X when placed in the cabinet.
Layer 3 Routing Support
The GS-5220-8UP2T2X enables the administrator to conveniently boost network efciency
by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the IPv4 OSPFv2
(Open Shortest Path First) settings automatically. The OSPF is an interior dynamic routing
protocol for autonomous system based on link state. The protocol creates a database for
link state by exchanging link states among Layer 3 switches, and then uses the Shortest
Path First algorithm to generate a route table based on that database.
Cybersecurity Network Solution to Minimize Security Risks
The cybersecurity feature included to protect the switch management in a mission-critical
network virtually needs no effort and cost to install. For efcient management, the IGS-
6325-20T4C4X is equipped with console, web and SNMP management interfaces. With
the built-in web-based management interface, the IGS-6325-20T4C4X offers an easy-
to-use, platform independent management and configuration facility. The IGS-6325-
20T4C4X supports SNMP and it can be managed via any management software based
on the standard SNMP protocol. For reducing product learning time, the IGS-6325-
20T4C4X offers Cisco-like command via Telnet or console port and customer doesn’t
Industrial L3 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP +
4-Port 10G SFP+ Managed Ethernet Switch
Physical Port
• 24-port 10/100/1000BASE-T RJ45 copper
• 4 100/1000BASE-X mini-GBIC/SFP slots, shared with
Port-21 to Port-24 compatible with 100BASE-FX SFP
• 4 10GBASE-SR/LR SFP+ slots, compatible with
1000BASE-SX/LX/BX SFP
• RJ45 to RS232 DB9 console interface for basic
management and setup
Hardware Conformance
• One 100 to 240V AC or dual 36 to 60V DC power input,
redundant power with polarity reverse protect function
–
Active-active redundant power failure protection
–
Backup of catastrophic power failure on one supply
–
Fault tolerance and resilience
• 19-inch rack-mountable design
• IP30 metal case protection
• Supports EFT protection for 6000V DC power and 6000V
DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Digital Input & Digital Output
• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrates sensors into auto alarm system
• Transfers alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
• Supports maximum 128 static routes and route summarization
• IP dynamic routing protocol supports OSPFv2
• Routing interface provides per VLAN routing mode
Layer 2 Features
• High performance of Store-and-Forward architecture, and
runt/CRC ltering eliminates erroneous packets to optimize
the network bandwidth
• Storm control support
–
Broadcast/Multicast/Unknown unicast