Datasheet

2
IGS-6325 Rack-mount series
Layer 3 IP Routing Features
• Supports maximum 128 static routes and route
summarization
• IP dynamic routing protocol supports OSPFv2
• Routing interface provides per VLAN routing mode
Layer 2 Features
• High performance of Store-and-Forward architecture, and
runt/CRCltering eliminateserroneouspacketstooptimize
the network bandwidth
• Storm control support
Broadcast/Multicast/Unknown unicast
• Supports VLAN
IEEE 802.1Q tagged VLAN
Up to 4K VLANs groups, out of 4096 VLAN IDs
Provides Bridging (VLAN Q-in-Q) support (IEEE
802.1ad)
Private VLAN Edge (PVE)
Protocol-based VLAN
MAC-based VLAN
IP subnet-based VLAN
GVRP
• Supports Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
BPDU Guard
• Supports Link Aggregation
802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (static trunk)
Maximum 14 trunk groups, with 16 ports for each trunk
Up to 80Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Portmirroringmonitorstheincomingoroutgoingtrafcon
a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link
detection(UDLD) that monitors a link between two
switches and blocks the ports on both ends of the link if
the link fails at any point between the two devices
• IEEE 1588 and Synchronous Ethernet network timing
Modbus TCP Provides Flexible Network Connectivity for Factory Automation
With the supported Modbus TCP/IP protocol, the IGS-6325 Rack-mount series
can easily integrate with SCADA systems, HMI systems and other data acquisition
systemsinfactoryoors.Itenablesadministratorstoremotelymonitortheindustrial
Ethernet switch’s operating information, port information and communication status,
thus easily achieving enhanced monitoring and maintenance of the entire factory.
1588 Time Protocol for Industrial Computing Networks
The IGS-6325 Rack-mount series is ideal for telecom and carrier Ethernet
applications, supporting MEF service delivery and timing over packet solutions for
IEEE 1588 and synchronous Ethernet.
SNMPv3
SSH
v2
Time Synchronization in Network
IGS-6325-20S4C4X
Transparent Clock
Grand Master Clock
Slave Clock
1000BASE-SX/LX Fiber-optic
1000
1000
1000
Base Station
1588 PTP 1588 PTP
AC and DC Redundant Power to Ensure Continuous Operation
The IGS-6325 Rack-mount series possesses a 100~240V AC power supply and
dual 24~60V DC power supply utilized as redundant power supply to ensure its
continuousoperation.Itsredundant powersystemisspecicallydesignedtohandle
the demands of high-tech facilities requiring the highest power integrity. Furthermore,
with the 24~60V DC power supply implemented, the IGS-6325 Rack-mount series
can be applied as the telecom level device and placed in almost any difficult
environment.
Digital Input and Digital Output for External Alarm
The IGS-6325 Rack-mount series helps the network administrators efficiently
manage the unexpected network situations by providing Digital Input and Digital
Output for external alarm device on the front panel. The Digital Input can be used
to detect and log the status of the external devices such as door intrusion detector.
The Digital Output could be used to send alarm whenever the IGS-6325 Rack-
mount series has port link-down or power failure.