Datasheet

1
IGS-6325 Rack-mount series
Physical Port
• IGS-6325-20S4C4X
– 14 100/1000BASE-X SFP slots
– 10 100/1000/2500BASE-X SFP slots
– 4 10/100/1000BASE-T RJ45 ports, shared with Port-1 to
Port-4
– 4 10GBASE-SR/LR SFP+ slots, compatible with
1000BASE-SX/LX/BX and 2500BASE-X SFP
– RJ45 to RS232 console interface for basic management
and setup
• IGS-6325-20T4C4X
– 24 10/100/1000BASE-T RJ45 ports
– 4 100/1000BASE-X SFP slots, shared with Port-1 to
Port-4
– 4 10GBASE-SR/LR SFP+ slots, compatible with
1000BASE-SX/LX/BX and 2500BASE-X SFP
– RJ45 to RS232 console interface for basic management
and setup
Hardware Conformance
• One 100 to 240V AC or dual 24 to 60V DC power input,
redundant power with reverse polarity protection
– Active-active redundant power failure protection
– Backup of catastrophic power failure on one supply
– Fault tolerance and resilience
• 19-inch rack-mountable design
• IP30 metal case
• Supports EFT 6000V DC protection and 6000V DC
Ethernet ESD protection
• -40 to 75 degrees C operating temperature for DC power
input
• -10 to 60 degrees C operating temperature for AC power
inpu
Digital Input & Digital Output
• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrates sensors into auto alarm system
• Transfers alarm to IP network via email and SNMP trap
10Gbps Fiber Ports and Multiple Dual Speed Fiber Ports Deliver High-
speed Networking
PLANET IGS-6325 Industrial Layer 3 Managed Rack-mount Series features 24
10/100/1000T or 24 100/1000X Gigabit ports, 4 10G SFP+ ports and Layer 3 IP
routing in a 1U case. With 10Gbps uplink, the IGS-6325 Rack-mount series can
handle extremely large amounts of data in a secure topology linking to an industrial
backbone or high capacity servers. The IGS-6325 Rack-mount series is capable of
providing non-blocking switch fabric and wire-speed throughput as high as 128Gbps
in the temperature range from -40 to 75 degrees C. It greatly simplifies the tasks
of upgrading the industrial LAN for catering to increasing bandwidth demands.
Furthermore, it adopts user-friendly “Front Access” design for easy wiring and
maintenance of the IGS-6325 Rack-mount series when placed in the cabinet.
Layer 3 Routing Support
IGS-6325 Rack-mount series enables the administrator to conveniently boost
network efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually,
and the IPv4 OSPFv2 (Open Shortest Path First) settings automatically. The OSPF
is an interior dynamic routing protocol for autonomous system based on link state.
The protocol creates a database for link state by exchanging link states among
Layer 3 switches, and then uses the Shortest Path First algorithm to generate a
route table based on that database.
Cybersecurity Network Solution to Minimize Security Risks
The cybersecurity feature included to protect the switch management in a mission-
criticalnetworkvirtuallyneedsnoeffortandcosttoinstall.Forefcientmanagement,
the IGS-6325 Rack-mount series is equipped with console, web and SNMP
management interfaces. With the built-in web-based management interface, the IGS-
6325 Rack-mount series offers an easy-to-use, platform independent management
and configuration facility. The IGS-6325 Rack-mount series supports SNMP and
it can be managed via any management software based on the standard SNMP
protocol. For reducing product learning time, the IGS-6325 Rack-mount series offers
Cisco-like command via Telnet or console port and customer doesn’t need to learn
new command from these switches. Moreover, the IGS-6325 Rack-mount series
offers remote secure management by supporting SSHv2, TLSv1.2 and SNMP v3
connection which can encrypt the packet content at each session.
Industrial L3 24-Port Gigabit Copper/SFP + 4-Port 10G SFP+
Managed Ethernet Switch