IGS-6325-Series Datasheet

IGS-6325 Rack-mount series
2
SNMP v 3
SSH
TLS
01010101010110010101010100010101010
01010101010110010101010100010101010
01010101010110010101010100010101010
IGS-6325-20S4C4X
Computer
doesn’t need to learn new command from these switches. Moreover, the IGS-6325 Rack-
mount series offers remote secure management by supporting SSH, SSL and SNMP v3
connection which can encrypt the packet content at each session.
Modbus TCP Provides Flexible Network Connectivity for Factory Automation
With the supported Modbus TCP/IP protocol, the IGS-6325 Rack-mount series
can easily integrate with SCADA systems, HMI systems and other data acquisition
systems in factory floors. It enables administrators to remotely monitor the industrial
Ethernet switch’s operating information, port information and communication status,
thus easily achieving enhanced monitoring and maintenance of the entire factory.
1588 Time Protocol for Industrial Computing Networks
The IGS-6325 Rack-mount series is ideal for telecom and carrier Ethernet applications,
supporting MEF service delivery and timing over packet solutions for IEEE 1588 and
synchronous Ethernet.
AC and DC Redundant Power to Ensure Continuous Operation
The IGS-6325 Rack-mount series possesses a 100~240V AC power supply and dual
36~60V DC power supply utilized as redundant power supply to ensure its continuous
operation. Its redundant power system is specifically designed to handle the demands
of high-tech facilities requiring the highest power integrity. Furthermore, with the 36~60V
DC power supply implemented, the IGS-6325 Rack-mount series can be applied as the
telecom level device and placed in almost any difcult environment.
Digital Input and Digital Output for External Alarm
The IGS-6325 Rack-mount series helps the network administrators efciently manage the
unexpected network situations by providing Digital Input and Digital Output for external
alarm device on the front panel. The Digital Input can be used to detect and log the status
of the external devices such as door intrusion detector. The Digital Output could be used
to send alarm whenever the IGS-6325 Rack-mount series has port link-down or power
failure.
Time Synchronization in Network
IGS-6325-20S4C4X
Transparent Clock
Grand Master Clock
Slave Clock
1000BASE-SX/LX Fiber-optic
1000
1000
1000
Base Station
1588 PTP 1588 PTP
–
Broadcast/Multicast/Unknown unicast
• Supports VLAN
–
IEEE 802.1Q tagged VLAN
–
Up to 256 VLANs groups, out of 4096 VLAN IDs
–
Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
–
Private VLAN Edge (PVE)
–
Protocol-based VLAN
–
MAC-based VLAN
–
IP subnet-based VLAN
–
GVRP
• Supports Spanning Tree Protocol
–
IEEE 802.1D Spanning Tree Protocol (STP)
–
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
–
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
–
BPDU Guard
• Supports Link Aggregation
–
802.3ad Link Aggregation Control Protocol (LACP)
–
Cisco ether-channel (static trunk)
–
Maximum 14 trunk groups, with 16 ports for each trunk
–
Up to 32Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring monitors the incoming or outgoing trafc on a
particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection(UDLD) that
monitors a link between two switches and blocks the ports on
both ends of the link if the link fails at any point between the
two devices
• IEEE 1588 and Synchronous Ethernet network timing
Quality of Service
• Ingress shaper and egress rate limit per port bandwidth control
• 8 priority queues on all switch ports
• Trafc classication
–
IEEE 802.1p CoS
–
ToS/DSCP/IP Precedence of IPv4/IPv6 packets
–
IP TCP/UDP port number
–
Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Trafc policing on the switch port
• DSCP remarking
• Voice VLAN