IGS-6325-Series Datasheet
IGS-6325 Rack-mount series
1
10Gbps Fiber Ports and Multiple Dual Speed Ports Deliver High-speed Networking
PLANET IGS-6325 Industrial Layer 3 Managed Rack-mount Switch Series features 24
10/100/1000T or 24 100/1000X Gigabit port, 4 10G SFP+ ports and Layer 3 IP routing
in a 1U case. With 10Gbps uplink, the IGS-6325 Rack-mount series can handle
extremely large amounts of data in a secure topology linking to an industrial backbone
or high capacity servers. The IGS-6325 Rack-mount series is capable of providing
non-blocking switch fabric and wire-speed throughput as high as 128Gbps in the
temperature range from -40 to 75 degrees C. It greatly simplies the tasks of upgrading
the industrial LAN for catering to increasing bandwidth demands. Furthermore, it adopts
user-friendly “Front Access” design for easy wiring and maintenance of the IGS-6325
Rack-mount series when placed in the cabinet.
Layer 3 Routing Support
The IGS-6325 Rack-mount series enables the administrator to conveniently boost network
efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the IPv4
OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an interior
dynamic routing protocol for autonomous system based on link state. The protocol creates
a database for link state by exchanging link states among Layer 3 switches, and then
uses the Shortest Path First algorithm to generate a route table based on that database.
Cybersecurity Network Solution to Minimize Security Risks
The cybersecurity feature included to protect the switch management in a mission-
critical network virtually needs no effort and cost to install. For efficient management,
the IGS-6325 Rack-mount series is equipped with console, web and SNMP
management interfaces. With the built-in web-based management interface,
the IGS-6325 Rack-mount series offers an easy-to-use, platform independent
management and configuration facility. The IGS-6325 Rack-mount series supports
SNMP and it can be managed via any management software based on the
standard SNMP protocol. For reducing product learning time, the IGS-6325 Rack-
mount series offers Cisco-like command via Telnet or console port and customer
Industrial L3 20-Port Copper/SFP + 4-Port Gigabit TP/SFP +
4-Port 10G SFP+ Managed Ethernet Switch
Physical Port
• 20-port 10/100/1000BASE-T RJ45 copper (for IGS-6325-20T4C4X)
• 20 100/1000BASE-X mini-GBIC/SFP slots (for IGS-6325-20S4C4X)
• 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to
Port-24 compatible with 100BASE-FX SFP (for IGS-6325-20T4C4X)
• 4 10/100/1000BASE-T RJ45 ports, shared with Port-1 to Port-
4 (for IGS-6325-20S4C4X)
• 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-
SX/LX/BX SFP
• RJ45 to RS232 console interface for basic management and
setup
Hardware Conformance
• One 100 to 240V AC or dual 36 to 60V DC power input,
redundant power with polarity reverse protect function
–
Active-active redundant power failure protection
–
Backup of catastrophic power failure on one supply
–
Fault tolerance and resilience
• 19-inch rack-mountable design
• IP30 metal case
• Supports EFT 6000V DC protection and 6000V DC Ethernet
ESD protection
• -40 to 75 degrees C operating temperature for DC power input
• -10 to 60 degrees C operating temperature for AC power input
Digital Input & Digital Output
• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrates sensors into auto alarm system
• Transfers alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
• Supports maximum 128 static routes and route summarization
• IP dynamic routing protocol supports OSPFv2
• Routing interface provides per VLAN routing mode
Layer 2 Features
• High performance of Store-and-Forward architecture, and runt/
CRC ltering eliminates erroneous packets to optimize the
network bandwidth
• Storm control support