(V2) Datasheet

IGS-620TF
4
Redundancy Application
The IGS-620TF Industrial Gigabit Ethernet Switch provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode
supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair.
Fiber Redundant Mode
IGS-620TF
Server
(ATM/
IP Camera/
Security Machine)
Redundant Link
2500BASE-X Fiber
(Disabled)
Gigabit
Ethernet Switch
Gigabit
Ethernet Switch
Primary Link
2500BASE-X Fiber
(Forwarding)
Data Server
1000BASE-T UTP
2500BASE-X Fiber Optic
10002500
Link Path Redundancy for Critical Network Service
2500
ProductSpecications
Model
IGS-620TF
HardwareSpecications
Copper Ports
4 x 10/100/1000BASE-T RJ45 TP
Auto-MDI/MDI-X, auto-negotiation
SFP Slots
2 x 100/1G/2.5GBASE-X SFP interfaces
Supports auto detection
DIP Switch
DIP Position Function
DIP-1
ON Fiber Redundant
OFF (default) Switch Mode
Connector
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm
Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
ESD Protection 6KV DC
Enclosure IP30 type metal case
Installation DIN-rail kit and wall-mount ear
Dimensions (W x D x H) 32 x 87 x 135mm
Weight 425g
Power Requirements
DC 12~48V or AC 24V
Redundant power with reverse polarity protection
Power Consumption / Dissipation 7.5watts / 26BTU
LED
3 x LED for System and Power:
■Green:DCPower1
■Green:DCPower2
■Red:Alarm
2 x LED for Per Copper Port (Port-1~Port-4):
■Green:1GLNK/ACT
■Amber:100LNK/ACT
1 x LED for Per SFP interface (Port-5 and Port-6)
■Green+Amber:2.5GLNK/ACT
■Green:1GLNK/ACT
■Amber:100LNK/ACT
SwitchSpecications
Switch Processing Scheme Store-and-Forward
Switch Fabric 18Gbps
Throughput (packet per second) 13.39Mpps@64bytes
Address Table 4K entries
Jumbo Frame 9216 bytes
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex