(V2) Datasheet

IGS-620TF
1
Flexible, Reliable and Industrial-grade Network Distance Extension Solution
PLANET IGS-620TF is an Industrial 6-port full Gigabit Ethernet Switch providing
non-blocking wire-speed performance and great flexibility for Gigabit Ethernet
extension in harsh industrial environment. It provides 4-port 10/100/1000BASE-T
RJ45 copper and 2 extra 100/1000/2500BASE-X SFP fiber optic interfaces
delivered in an IP30 rugged strong case with redundant power system. The IGS-
620TF is well suited for applications like deploying surveillance system, and
securing control and wireless service in climatically demanding environments with
wide temperature range from -40 to 75 degrees C.
Physical Port
• Four 10/100/1000BASE-T RJ45 ports with auto MDI /
MDI-X function
• Two SFP interfaces, supporting 100/1000/2500BASE-X
transceiver type auto detection
Fiber Port Redundancy
• Automatically detects link status and redundancy on dual
ports with the same connector type.
• Only primary port is active at a time, while the backup port
is blocked.
• Whenprimaryportlinkfailureoccurs,thetrafcwillswap
to backup port automatically.
• Oncetheprimary-portstatusisbacktolinkup,thetrafc
will swap from backup port to primary port.
Layer 2 Features
• Supports auto-negotiation and 10/100Mbps half / full
duplex and 1000Mbps full duplex mode
• High performance Store and Forward architecture, runt/
CRClteringeliminateserroneouspacketstooptimizethe
network bandwidth
• IEEE802.3xowcontrolforfullduplexoperationandback
pressure for half duplex operation
• 9KJumboFramesizesupport
• Backplane (Switching Fabric): 18Gbps
• Integrated address look-up engine, supporting 4K absolute
MAC addresses
• Automatic address learning and address aging
• IEEE 802.1Q VLAN transparency
• CSMA/CD Protocol
Industrial Case and Installation
• Slim IP30 metal case protection
• DIN-rail, wall-mount or side wall-mount design for
redundant power design
– 12 to 48V DC, redundant power with reverse polarity
protection
– AC 24V power adapter acceptable
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Industrial 4-Port 10/100/1000BASE-T + 2-Port 100/1G/2.5GBASE-X SFP
Ethernet Switch
Fiber Optic Link Capability Enables Extension of Network Deployment
The two SFP ports are compatible with 100BASE-FX, 1000BASE-X and
2500BASE-X SFP (small form factor pluggable) fiber-optic transceivers. The fiber
optic uplink capability guarantees the throughput to all nodes hooked into the
network and the Gigabit Ethernet distance can be extended from 300 meters (Multi-
mode fiber cable) to 10/20/30/40/50/70/120 kilometers (Single-mode fiber cable).
The Fast Ethernet distance can also be extended from 2km (Multi-mode fiber
cable) to 20/40/60 kilometers (Single-mode fiber cable). They are well suited for
applications within the factory data centers and distributions.