User's Manual

User’s Manual of IGS-604HPT-RJ
See he
lp on MEP create WEB.
 Direction
See he
lp on MEP create WEB.
 Residence Port
See he
lp on MEP create WEB.
 Flow Instance
See he
lp on MEP create WEB.
 Tagged VID
See he
lp on MEP create WEB.
 This MAC
Instance Configuration:
Object Description
See he
lp on MEP create WEB.
 Level
T
his is the configuration of the two possible Maintenance Association Identifier
formats.
ITU ICC: This is defined by ITU. 'ICC' can be max. 6 char. 'MEG id' can be max. 7
char.
IEEE String: This is defined by IEEE. 'Domain Name' can be max. 8 char. 'MEG
id' can be max. 8 char.
 Format
T
his is either ITU ICC (MEG ID value[1-6]) or IEEE Maintenance Domain Name -
depending on 'Format'. See 'Format'.
 Domain Name
T
his is either ITU UMC (MEG ID value[7-13]) or IEEE Short MA Name -
depending on 'Format'. See 'Format'. In case of ITU ICC format this can be max.
7 char. If only 6 char. is entered the MEG ID value[13] will become NULL.
 MEG Id
T
his value will become the transmitted two byte CCM MEP ID.
 MEP Id
F
ault Cause indicating that a CCM is received with a lower level than the
configured for this MEP.
 cLevel
F
ault Cause indicating that a CCM is received with a MEG ID different from
configured for this MEP.
 cMEG
F
ault Cause indicating that a CCM is received with a MEP ID different from all
'Peer MEP ID' configured for this MEP.
 cMEP
F
ault Cause indicating that AIS PDU is received.
 cAIS
F
ault Cause indicating that LCK PDU is received.
 cLCK
F
ault Cause indicating that server layer is indicating Signal Fail.
 cSSF
T
he consequent action of blocking service frames in this flow is active.
 aBLK
T
he consequent action of indicating Trail Signal Fail to-wards protection is active.
 aTSF
T
his box is used to mark a Peer MEP for deletion in next Save operation.
 Delete
 Peer MEP ID
This value will become an expected MEP ID in a received CCM - see 'cMEP'.
345