User's Manual

User’s Manual of IGS-604HPT-RJ
Priorit
y Code Point value used for PTP frames.
 PCP
Clock current Data Set
Object Description
Steps Remov
ed : It is the number of PTP clocks traversed from the grandmaster
to the local slave clock.
 stpRm
T
ime difference between the master clock and the local slave clock, measured in
ns.
 Offset from master
T
he mean propagation time for the link between the master and the local slave
 Mean Path Delay
Clock Parent Data Set
Object Description
Clock i
dentity for the parent clock, if the local clock is not a slave, the value is the
clocks own id.
 Parent Port Identity
Port Id for the
parent master port
 Port
Parents Stats (al
ways false).
 P Stat
It is observed p
arent offset scaled log variance
 Var
Observed Par
ent Clock Phase Change Rate. i.e. the slave clocks rate offset
compared to the master. (unit = ns per s).
 Change Rate
 Grand Master Identity
Clock identity for the grand master clock, if the local clock is not a slave, the
value is the clocks own id.
T
he clock quality announced by the grand master (See description of Clock
Default DataSet:Clock Quality)
 Grand Master Clock
Quality
Clock pri
ority 1 announced by the grand master
 Pri1
Clock pri
ority 2 announced by the grand master
 Pri2
Servo Parameters
Object Description
If true then Offset F
rom Master, MeanPathDelay and clockAdjustment are logged
on the debug terminal
 Display
If true the P part of the algorit
hm is included
 P-enable
If true the I part of the algorit
hm is included
 I-enable
If true the D part of the algorit
hm is included
 D-enable
‘P’ constant
[1..1000] see above
339