Datasheet
IGS-604HPT-RJ
1
Suitable for Industrial Environment
PLANET IGS-604HPT-RJ, an Industrial Managed Ethernet Switch, comes with an IP67-
rated industrial case, 4-port 10/100/1000T 802.3at PoE, 2-port 10/100/1000T, and static
Layer 3 routing, providing a high level of immunity against electromagnetic interference
and heavy electrical surges which are usually found on plant oors or in curb-side trafc
control cabinets. The IGS-604HPT-RJ can be easily mounted on a DIN rail or wall taking
up less space. Each of the four Gigabit PoE+ ports provides 36-watt of power, which
means a total power budget of up to 144 watts can be utilized simultaneously without
considering the different types of PoE applications being employed. It also provides
a quick, safe and cost-effective Power over Ethernet network solution to IP security
surveillance for small businesses and enterprises.
Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port
10/100/1000T Managed Ethernet Switch (-40~75 degrees C)
Physical Port
• 6-port 10/100/1000BASE-T waterproof and dustproof
RJ45 copper with 4-port IEEE 802.3at/af Power over
Ethernet Injector function
Hardware Conformance
• Complies with IEEE 802.3at High Power over Ethernet end-
span PSE
• Complies with IEEE 802.3af Power over Ethernet end-span
PSE
• Up to 4 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE Management
–
Total PoE power budget control
–
Per port PoE function enable/disable
–
PoE Port Power feeding priority
–
Per PoE port power limitation
–
PD classication detection
–
PD alive check
–
PoE schedule
–
PD scheduled power recycling
Hardware Conformance
• IP67-rated aluminum case
• Redundant power design
–
48 to 56V DC, redundant power with polarity reverse
protect function
–
Active-active redundant power failure protection
–
Backup of catastrophic power failure on one supply
–
Fault tolerance and resilience
• DIN-rail and wall-mount design
• Supports EFT protection for 6000V DC power and 6000V
DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Layer 3 IP Routing Features
• Supports maximum 32 static routes and route
summarization
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame ow control (full-duplex)
2 x Waterproof Gigabit RJ45
IP67 Rugged Case
4 x Waterproof Gigabit PoE+ RJ45
48~56V DC Waterproof
Redundant Power Input