User's Manual

Table Of Contents
User’s Manual of IGS-604HPT-M12
359
4.20.4 Ethernet Ring Protocol Switch Configuration
This page allows the user to inspect and configure the current ERPS Instance; screen in Figure 4-20-4 appears.
Figure 4-20-4: Ethernet Ring Protocol Switch Configuration Screenshot
The page includes the following fields:
Instance Data:
Object Description
T
he ID of the Protection group.
ERPS ID
See he
lp on ERPS to create Web.
Port 0
See he
lp on ERPS to create Web.
Port 1
See he
lp on ERPS to create Web.
Port 0 SF MEP
See he
lp on ERPS to create Web.
Port 1 SF MEP
See he
lp on ERPS to create Web.
Port 0 APS MEP
See he
lp on ERPS to create Web.
Port 1 APS MEP
T
ype of Protecting ring. It can be either major ring or sub-ring.
Ring Type
Instance Configuration:
Object Description
Configuration
Red: This ERPS is only created and has not yet been configured - is not active.