User's Manual

User’s Manual of IGS-604HPT-M12
292
The page includes the following fields:
Aging Configuration
By default, dynamic entries are removed from the MAC table after 300 seconds. This removal is also called aging.
Object Description
Enab
les/disables the the automatic aging of dynamic entries
 Disable Automatic
Aging
T
he time after which a learned entry is discarded. By default, dynamic entries are
removed from the MAC after 300 seconds. This removal is also called aging.
(Range: 10-10000000 seconds; Default: 300 seconds)
 Aging Time
MAC Table Learning
If the learning mode for a given port is grayed out, another module is in control of the mode, so that it cannot be changed by the
user. An example of such a module is the MAC-Based Authentication under 802.1X.
Object Description
Lear
ning is done automatically as soon as a frame with unknown SMAC is received.
 Auto
No le
arning is done.
 Disable
Onl
y static MAC entries are learned, all other frames are dropped.
Note: Make sure that the link used for managing the switch is added to the Static
Mac Table before changing to secure learning mode, otherwise the management
link is lost and can only be restored by using another non-secure port or by
connecting to the switch via the serial interface.
 Secure
Static MAC Table Configuration
The static entries in the MAC table are shown in this table. The static MAC table can contain 64 entries. The MAC table is sorted
first by VLAN ID and then by MAC address.
Object Description
Check to de
lete the entry. It will be deleted during the next save.
 Delete
T
he VLAN ID of the entry.
 VLAN ID
T
he MAC address of the entry.
 MAC Address
Checkm
arks indicate which ports are members of the entry. Check or uncheck as
needed to modify the entry.
 Port Members
 Adding a New Static
Entry
Click
to add a new entry to the static MAC table.
Specify the VLAN ID, MAC address, and port members for the new entry. Click
"Save".