User's Manual

User’s Manual of IGS-604HPT-M12
1.4 Product Features
 Physical Port
 6-port 10/100/1000BASE-T waterproof and dustproof M12 connectors with 4-port IEEE 802.3at/af Power over
Ethernet Injector function
 Hardware Conformance
 Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
 Complies with IEEE 802.3af Power over Ethernet end-span PSE
 Up to 4 ports of IEEE 802.3af/802.3at devices powered
 Supports PoE Power up to 36 watts for each PoE port
 Auto detects powered device (PD)
 Circuit protection prevents power interference between ports
 Remote power feeding up to 100 meters
 PoE Management
 Total PoE power budget control
 Per port PoE function enable/disable
 PoE Port Power feeding priority
 Per PoE port power limitation
 PD classification detection
 PD alive check
 PoE schedule
 PD scheduled power recycling
 Hardware Conformance
 IP67-rated aluminum case
 Redundant power design
 48 to 56V DC, redundant power with polarity reverse protect function
 Active-active redundant power failure protection
 Backup of catastrophic power failure on one supply
 Fault tolerance and resilience
 DIN-rail and wall-mount design
 Supports 6000V DC Ethernet ESD protection
 -40 to 75 degrees C operating temperature
 Layer 3 IP Routing Features
 Supports maximum 32 static routes and route summarization
 Layer 2 Features
 Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
 High performance of Store-and-Forward architecture, and runt/CRC filtering that eliminates erroneous packets to
optimize the network bandwidth
 Storm control support
 Broadcast/Multicast/Unicast
 Supports VLAN
 IEEE 802.1Q tagged VLAN
18