Datasheet

IGS-604HPT-M12
3
Built-in Unique PoE Functions for Surveillance Management
As a managed PoE Switch for surveillance network, the IGS-604HPT-M12 features the
following intelligent PoE management functions:
• PD Alive Check
• Scheduled Power Recycling
• SMTP/SNMP Trap Event Alert
• PoE Schedule
Intelligent Powered Device Alive Check
The IGS-604HPT-M12 can be configured to monitor a connected PD (Powered Device)
status in real time via ping action. Once the PD stops working and it is without response,
the IGS-604HPT-M12 will resume the PoE port power and bring the PD back to work. It will
greatly enhance the network reliability through the PoE port resetting the PD’s power source,
thus reducing administrator management burden.
Scheduled Power Recycling
TheIGS-604HPT-M12allowseachoftheconnectedPDstorebootataspeciedtimeeach
week.Therefore,itwillreducethechanceofPDcrashresultingfrombufferoverow.
• MLDsnoopingportltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x port-based/MAC-based network access
authentication
– IEEE 802.1x authentication with guest VLAN
– Built-in RADIUS client to cooperate with the RADIUS
servers
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List (ACL)
• Source MAC/IP address binding
• DHCPSnoopingtolterdistrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Telnet command line interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– SSH/SSL secure access
• IPv6 address/NTP management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Reset button for system reboot or reset to factory default
– Dual images
• DHCP relay and option 82
• User privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network diagnostic
– Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
– ICMPv6/ICMPv4 remote ping
• SMTP/Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMPtrapforinterfacelinkupandlinkdownnotication
• System Log
• PLANET Smart Discovery Utility for deployment management
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification
S M T W T F S
Automatically Reboot
Every Friday 23:00
PoE PT Camera
ON ON
PoE
OFF
CPU/Buffer
Load 85%
CPU/Buffer
Load 10%
SMTP/SNMP Trap Event Alert
Though most NVR or camera management software offers SMTP email alert function, the
IGS-604HPT-M12 further provides event alert function to help to diagnose the abnormal
device owing to whether or not there is a break of the network connection, loss of PoE
power or the rebooting response by the PD Alive Check process.