Datasheet

3
IGS-5227X-4P2T
• Link Layer Discovery Protocol (LLDP)
• Provides ONVIF for co-operating with PLANET video IP
surveillances
Layer 3 IP Routing Features
• Supports maximum 8 static routes and route summarization
• IPv4/IPv6 software static routing
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
– IEEE 802.1p CoS
– IP TOS/DSCP/IP precedence
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policingontheswitchport
• DSCP remarking
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4IGMPsnoopingportltering
• IPv6MLDsnoopingportltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x port-based/MAC-based network access
authentication
– Built-in RADIUS client to co-operate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snoopingtolterun-trustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
54VDCPoE
12~54VDC
RedundantPowerInput
802.3atPoECompliant
PDDevice
10/100/1000BASE-T
10/100/1000Mbps Ethernet Data Rate
12~54V DC to 54V DC PoE Power Boost
Centralized Power Management for Gigabit Ethernet PoE+ Networking
TofullltheneedsofhigherpowerrequiredPoE+networkapplicationswithGigabit
speed transmission, the IGS-5227X-4P2T features high-performance Gigabit IEEE
802.3at PoE+ (up to 36 watts) on PoE+ ports(Port 3 to port 6). It perfectly meets
the power requirements of PoE VoIP phone, PoE Wireless AP and all kinds of PoE
IP cameras such as IR, PTZ, speed dome cameras and even box type IP cameras
with a built-in fan and heater for high power consumption. The IGS-5227X-4P2T’s
PoE capabilities also help to reduce deployment costs for network devices as
a result of freeing from restrictions of power outlet locations. Power and data
switching are integrated into one unit, delivered over a single cable and managed
centrally. It thus eliminates cost for additional AC wiring and reduces installation
time.
Built-in Unique PoE Functions for Surveillance Management
As an Industrial managed PoE Switch for surveillance network, the IGS-5227X-
4P2T features the following intelligent PoE management functions:
■PoESchedule
■PDAliveCheck
■ScheduledPowerRecycling
■SMTP/SNMPTrapEventAlert
PoE Schedule for Energy Saving
Besides being used for IP surveillance, the IGS-5227X-4P2T is certainly applicable
to build any PoE network including VoIP and wireless LAN. Under the trend of
energy saving worldwide and contributing to the environmental protection on the
Earth, the IGS-5227X-4P2T can effectively control the power supply besides its
capability of giving high watts power. The “PoE schedule” function helps you to
enable or disable PoE power feeding for each PoE port during specified time
intervals and it is a powerful function to help SMBs and enterprises save energy
and budget.