Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial EthernetIndustrial IP67-rated 4-Port 10/100/1000T 802.3at PoE+ 2-Port 10/100/1000T Managed Ethernet Switch

IGS-5227X-4P2T

Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE+ 2-Port

10/100/1000T Managed Ethernet Switch

Suitable for Industrial Environment

PLANET IGS-5227X-4P2T, an Industrial Layer 2+ Managed Ethernet Switch,

comes with an IP67-rated industrial case, 4-port 10/100/1000T 802.3at PoE+,

2-port 10/100/1000T, and static Layer 3 routing, providing a high level of immunity

against electromagnetic interference and heavy electrical surges which are usually

found on plant floors or in curb-side traffic control cabinets. The IGS-5227X-4P2T

can be easily mounted on a DIN rail or wall taking up less space. Each of the four

Gigabit PoE+ ports provides 36 watts of power, which means a total power budget

of up to 144 watts can be utilized simultaneously without considering the different

types of PoE applications being employed. It also provides a quick, safe and cost-

effective Power over Ethernet network solution to IP security surveillance for small

businesses and enterprises.

Physical Port

• 6-port 10/100/1000BASE-T waterproof and dustproof M12

X-coded female connectors with 4-port IEEE 802.3at/af

Power over Ethernet Injector function

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus/end-

span PSE

• Up to 4 IEEE 802.3af/802.3at devices powered

• Supports PoE power up to 36 watts for each PoE port (Port 3

to port 6)

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100m

• PoE management features

– PoE admin-mode control

– PoE management mode selection

– PoE Legacy mode selection

– PoE Budget setup option

– Per port PoE function enable/disable

– PoE port power feeding priority

– Per PoE port power limit

– PoE Port Status monitoring

– PDclassicationdetection

– Sequence port PoE

• Intelligent PoE features

– Temperature threshold control

– PoE usage threshold control

– PoE extension

– PoE schedule

– PD alive check

– LLDP PoE Neighbors

Industrial Protocol

• Modbus TCP for real-time monitoring in the SCADA system

• IEEE 1588v2 PTP (Precision Time Protocol)

Industrial Case and Installation

• IP67-rated aluminum case

• DIN-rail or wall-mount design

• 12~56V DC, redundant power with reverse polarity protection

2 x Waterproof and Dustproof Gigabit M12

IP67 Rugged Case

4 x Waterproof and Dustproof Gigabit PoE+ M12

12~56V DC Waterproof and Dustproof M23

Redundant Power Input

Summary of content (13 pages)

PAGE 1
IGS-5227X-4P2T Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE+ 2-Port 10/100/1000T Managed Ethernet Switch Physical Port • 6-port 10/100/1000BASE-T waterproof and dustproof M12 X-coded female connectors with 4-port IEEE 802.3at/af Power over Ethernet Injector function Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus/endspan PSE • Up to 4 IEEE 802.3af/802.
PAGE 2
IGS-5227X-4P2T Waterproof and Dustproof M12 Ethernet Connector • Supports 6KV DC Ethernet ESD protection The IGS-5227X-4P2T is equipped with a 6-port 10/100/1000BASE-T auto- • -40 to 75 degrees C operating temperature negotiation dustproof M12 connector with 4-port IEEE 802.3at PoE+ (Port 3 to Port 6); each PoE port provides 36 watts PoE output. The M12 connector provides tight and strong connection, and guarantees stable Ethernet operation performance under high vibration and shock environment.
PAGE 3
IGS-5227X-4P2T • Link Layer Discovery Protocol (LLDP) • Provides ONVIF for co-operating with PLANET video IP surveillances 54V DC PoE 802.
PAGE 4
IGS-5227X-4P2T • IP Source Guard prevents IP spoofing attacks 8 AM 5 PM 5 PM 8 AM • IP address access management to prevent unauthorized intruder Management • IPv4 and IPv6 dual stack management PoE PoE PoE PoE PoE PoE PoE PoE • Switch Management Interfaces –– Web switch management Power On Power On Power On Power On Power Off Power Off Power Off Power On 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts Total Consumption of 36 watts/hr Save 24 watts/hr durin
PAGE 5
IGS-5227X-4P2T SMTP/SNMP Trap Event Alert Though most NVR or camera management software offers SMTP email alert function, the IGS-5227X-4P2T further provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, loss of PoE power or the rebooting response by the PD Alive Check process.
PAGE 6
IGS-5227X-4P2T Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5227X-4P2T supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.
PAGE 7
IGS-5227X-4P2T Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management The IGS-5227X-4P2T not only provides ultra high transmission performance, and excellent Layer 2 and Layer 4 technologies, but also Layer 3 IPv4/IPv6 VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secure, flexibly-managed and simple networking application.
PAGE 8
IGS-5227X-4P2T Applications High Availability Networking Solution for Surveillance System The IGS-5227X-4P2T’s strong, rapid, self-recovery capability helps to prevent network interruptions and external intrusions. Customer’s automation network is integrated with ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) so as to enhance system reliability and uptime.
PAGE 9
IGS-5227X-4P2T Railway Transmission System Passenger Information System PoE IP Camera Next Stop Laptop Entertainment System PoE PoE N N Content Server AP IGS-5227X-4P2T PoE IGS-5227X-4P2T Control Center IGS-5227X-4P2T IGS-5227X-4P2T PoE IP Camera PoE IP Camera PoE PoE Industrial Backbone Switch PC VoIP PC AP PoE PoE 1000BASE-TX UTP 1000BASE-TX UTP with PoE 9
PAGE 10
IGS-5227X-4P2T Specifications Product IGS-5227X-4P2T Hardware Specifications Copper Ports 6 x M12, 8-pin X-coded female connector, 10/100/1000BASE-T auto-MDI/MDI-X ports Power Connector 1 x M23, 5-pin A-coded male connector Dimensions (W x D x H) 103 x 68.2 x 163 mm Weight 1151g Enclosure IP67 aluminum case Installation Wall-mount kit and DIN-rail kit ystem on: DC 12V:6.7W/22BTU DC 18V:6.3W/21BTU Power Consumption DC 56V:6.
PAGE 11
IGS-5227X-4P2T Link Aggregation IEEE 802.3ad LACP/static trunk 3 groups with 2 ports per trunk IEEE 802.1D Spanning Tree Protocol (STP) Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) Traffic classification based strict priority and WRR 8-level priority for switching: QoS - Port number - 802.1p priority - 802.
PAGE 12
IGS-5227X-4P2T IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet Standards Compliance IEEE 802.
PAGE 13
IGS-5227X-4P2T Dimensions 40 100 50 6 84 68 103 9 LNK/ACT 1 2 LNK ACT LNK/ACT 3 4 LNK/ACT 5 188 204 163 104 34.5 48.8 PoE 6 PoE GND V1 + V2 + V1 V2 5 4 Fault PWR 2 R.O. 6 7 3 2 8 1 Pin 1 2 3 4 5 6 7 8 Con DA+ DA DB+ DB DD+ DD DC DC+ 40 DC Input: 12-56V , 6.5A max. PWR 1 Ring PoE IP67 Mgt. IGS-5227X-4P2T 53 60 100 Unit: mm Ordering Information IGS-5227X-4P2T Industrial IP67-rated 4-Port 10/100/1000T 802.