Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial SwitchesIndustrial IP67-rated 6-Port 10/100/1000T M12 Managed Ethernet Switch (-40~75C, A-coded M12)

IGS-5227-6MT

Rugged Enough to Withstand Interferences for Smooth Operation

PLANET IGS-5227-6MT Industrial Managed Ethernet Switch comes with an IP67-

rated industrial case, 6-port 10/100/1000T and static Layer 3 routing, providing

a high level of immunity against electromagnetic interference and heavy electrical

surges which are usually found on plant floors or in curb-side traffic control

cabinets. The IGS-5227-6MT can be easily mounted on a DIN rail or wall taking

up less space. It provides a quick, safe, cost-effective and high-performance

Ethernet network solution to IP security surveillance for small businesses and

enterprises.

Waterproof and Dustproof M12 Ethernet Connector

The IGS-5227-6MT is equipped with a 6-port 10/100/1000BASE-T auto-negotiation

waterproof and dustproof M12 connector. The M12 connector provides tight and

strong connection that guarantees stable Ethernet operation performance under

high vibration and shock environment. It comes with the industrial protection rating

of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and

cold.

Industrial IP67-rated 6-Port 10/100/1000T M12 Managed

Ethernet Switch (-40~75 degrees C, A-coded M12)

Physical Port

• 6-port 10/100/1000BASE-T waterproof and dustproof

M12 connectors

Hardware Conformance

• IP67-rated aluminum case

• Redundant power design

–

9 to 48V DC, redundant power with polarity reverse

protect function

–

Active-active redundant power failure protection

–

Backup of catastrophic power failure on one supply

–

Fault tolerance and resilience

–

24V AC power input acceptable

• DIN-rail and wall-mount design

• Supports Ethernet ESD protection of 6000V DC

• -40 to 75 degrees C operating temperature

Layer 3 IP Routing Features

• Supports maximum 32 static routes and route

summarization

Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and

IEEE802.3xpauseframeowcontrol(full-duplex)

• High performance of Store-and-Forward architecture, and

runt/CRClteringthateliminateserroneouspacketsto

optimize the network bandwidth

• Storm control support

–

Broadcast/Multicast/Unicast

• Supports VLAN

–

IEEE 802.1Q tagged VLAN

–

Up to 255 VLANs groups, out of 4095 VLAN IDs

–

Provides Bridging (VLAN Q-in-Q) support (IEEE

802.1ad)

–

Private VLAN Edge (PVE)

–

Protocol-based VLAN

–

MAC-based VLAN

–

IP subnet-based VLAN

–

Voice VLAN

• Supports Spanning Tree Protocol

–

IEEE 802.1D Spanning Tree Protocol (STP)

–

IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

–

IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),

spanning tree by VLAN

–

BPDU Guard

6 x Waterproof Gigabit M12

IP67 Rugged Case

9~48V DC, 24V AC Waterproof

Redundant Power Input

Summary of content (8 pages)

PAGE 1
IGS-5227-6MT Industrial IP67-rated 6-Port 10/100/1000T M12 Managed Ethernet Switch (-40~75 degrees C, A-coded M12) Physical Port • 6-port 10/100/1000BASE-T waterproof and dustproof M12 connectors Hardware Conformance • IP67-rated aluminum case • Redundant power design –– 9 to 48V DC, redundant power with polarity reverse protect function –– Active-active redundant power failure protection –– Backup of catastrophic power failure on one supply –– Fault tolerance and resilience Rugged Enough to Withstand In
PAGE 2
IGS-5227-6MT • Supports Link Aggregation –– 802.
PAGE 3
IGS-5227-6MT Featuring Fast Recovery for Critical Network Applications • Source MAC/IP address binding The Switch supports redundant ring technology and features strong, rapid self-recovery • DHCP Snooping to filter distrusted DHCP messages capability to prevent interruptions and external intrusions. It incorporates advanced • Dynamic ARP Inspection discards ARP packets with ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.
PAGE 4
IGS-5227-6MT Powerful Security The IGS-5227-6MT offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user, and device authentication.
PAGE 5
IGS-5227-6MT Applications High Availability Networking Solution for Surveillance System The Switch has the capability to rapidly recover itself in case there are interruptions or external instrusions. As the ITU-T G.8032 ERPS is employed, the reliability and uptime of the network can be greatly enhanced. Thus, the IGS-5227-6MT, with its redundant connection and high bandwidth, is ideal for building an IP-based surveillance infrastructure in public transportation.
PAGE 6
IGS-5227-6MT Specifications Product IGS-5227-6MT Hardware Specifications Copper Ports 6 x M12, 8-pin A-coded female connector, 10/100/1000BASE-T auto-MDI/MDI-X ports Power Connector 1 x M12, 5-pin A-coded male connector Switch Architecture Store-and-Forward Switch Fabric 12Gbps/non-blocking Throughput 8.9Mpps@64bytes Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4M bits Flow Control IEEE 802.
PAGE 7
IGS-5227-6MT Layer 3 Functions IP Interfaces Max. 8 VLAN interfaces Routing Table Max.
PAGE 8
IGS-5227-6MT Drawing 40 100 84 68 6 50 103 2 LNK/ACT 123 LNK/ACT V2 V1 V2 V1 6 3 FAULT 2 1 4 7 6 5 PWR 2 R.O. PWR 1 Ring 8 Pin 1 2 3 4 5 6 7 8 Con DA+ DA DB+ DC+ DC DB DD+ DD 40 5 188 204 4 104 34.5 3 163 LNK ACT 9 48.8 LNK/ACT 1 �4 -22 14 � INPUT DC 9~48V IP67 Mgt. M12 4 IGS-5227-6MT 15.53 16.