(V2) Datasheet

IGS-5227-6MT-X
2
Environmentally Hardened Design
The IGS-5227-6MT-X is able to protect itself from dust and water ingress, and to
operate under the temperature range from -40to75degreesC. All these features
ensure the highest level of reliability for mission-critical applications in any difficult
environment.
Dual Power Input for High Availability Network System
The IGS-5227-6MT-X features a strong dual power input system (Dual9V~48V
DC) incorporated into customer’s automation network to enhance system reliability
and uptime. For example, when DC Power 1 fails to work, the hardware failover
function will be activated automatically to keep powering the IGS-5227-6MT-X via
DC Power 2 alternatively without any loss of operation.
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-5227-6MT-X supports redundant ring technology and features strong,
rapid self-recovery capability to prevent interruptions and external intrusions.
It incorporates advanced ITU-TG.8032ERPS(EthernetRingProtection
Switching)technology, Spanning Tree Protocol (802.1s MSTP), and redundant
power input system into customer’s industrial automation network to enhance
system reliability and uptime in harsh factory environments. In a certain simple Ring
network, the recovery time of data link can be as fast as 20ms.
• Supports SpanningTreeProtocol
–
IEEE 802.1D Spanning Tree Protocol (STP)
–
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
–
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
–
BPDU Guard
• Supports LinkAggregation
–
802.3ad Link Aggregation Control Protocol (LACP)
–
Cisco ether-channel (static trunk)
–
Maximum 3 trunk groups, with 6 ports for each trunk
–
Up to 12Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring monitors the incoming or outgoing trafc on
a particular port
• Loop protection to avoid broadcast loops
• Supports ITU-T G.8032 ERPS (Ethernet Ring Protection
Switching)
Quality of Service
• Ingress shaper and egress rate limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafc classication
–
IEEE 802.1p CoS
–
ToS/DSCP/IP precedence of IPv4/IPv6 packets
–
IP TCP/UDP port number
–
Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Trafc-policing policies on the switch port
• DSCP remarking
Multicast
• Supports IGMP snooping v1, v2 and v3
• Supports MLD snooping v1 and v2
• Querier mode support
• IGMP snooping port ltering
• MLD snooping port ltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
–
IEEE 802.1x port-based/MAC-based network access
authentication
1000
1000
Industrial 10G Switch
8-Port MAN Switch
Industrial MAN Switch
Factory
Office
Control Center
E.R.P.S. Ring for Metropolitan Area Network Application
Recovery Time < 50ms
IGS-5227-6MT-X
Highway